Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wilton Manors, FL
Window and door installation in Wilton Manors typically runs $650-$2,800 per opening depending on product tier, with most CBS ranch retrofits requiring custom sizing due to non-standard 1950s-60s rough openings. We’re Sightline Windows & Doors, and we measure every job in Wilton Manors with the document the customer keeps - the written quote cannot differ from that measurement. Call (561) 200-8592 to schedule your free measured survey.
Why Wilton Manors Homes Are Different
Wilton Manors is a fully built-out enclave of roughly one square mile where the residential stock is almost entirely 1950s-60s concrete block ranch homes. The vast majority were originally fitted with jalousie windows - louvered glass panels that are now non-compliant under Florida’s post-Hurricane Andrew impact-rated building codes. Every window replacement here is therefore a code-mandated retrofit into vintage CBS rough openings that rarely match modern standard sizing.
The Middle River and its canal tributaries run directly through the residential grid, placing a large share of properties in close proximity to brackish water year-round. This accelerates oxidation of aluminum frames, screen tracks, and door hardware noticeably faster than in inland Broward cities. Canal-adjacent homes show aluminum frame pitting and screen frame failure within 5-7 years of a standard replacement. Experienced local installers default to anodized or vinyl-clad frames and stainless or marine-grade hardware on virtually every bid in the city.
The city’s outsized per-household renovation spending, driven by an exceptionally active homeowner community, means the replacement cycle runs at unusually high volume for a city of fewer than 13,000 residents. Permitted work in Wilton Manors must meet Broward County’s mandatory impact-rated standards, and the limited lot sizes typical of this era mean crews work in tight setbacks with material staging planned precisely.
Our Main Wilton Manors Services
Most calls we receive from Wilton Manors homeowners center on two needs: replacing original jalousie and metal awning windows with code-compliant impact-rated units, and upgrading hollow-core exterior doors to hurricane-rated entry systems. Here is what each service involves in this market.
Window Replacement in Wilton Manors
We replace original jalousie, metal awning, and single-pane windows in Wilton Manors’s CBS ranch homes with impact-rated units that meet Broward County code. Because 1950s-60s rough openings rarely match modern standard sizes, our measured survey documents the exact frame reading before any product is ordered. Window Replacement in Wilton Manors covers the full scope from survey to final inspection.
Impact Windows & Doors in Wilton Manors
Every permitted window and door replacement in Wilton Manors must carry a Miami-Dade or Florida Product Approval for wind-borne debris resistance. We specify PGT, CGI, CWS, and ES Windows product lines by performance tier and price range, with corrosion-resistant framing standard given the city’s brackish-water exposure. Impact Windows & Doors in Wilton Manors details the code compliance process.
Sliding & Patio Doors in Wilton Manors
Original sliding glass doors in Wilton Manors’s ranch homes often run on corroded aluminum tracks with single-pane glazing that fails both impact code and energy standards. We replace these with multi-panel sliding systems sized to existing CBS openings, with stainless rollers and laminated glass specified for canal-adjacent properties. Sliding & Patio Doors in Wilton Manors covers product options and installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Wilton Manors
Window installation in Wilton Manors means retrofitting impact-rated units into 1950s-60s CBS rough openings that were never designed for modern frame depths or anchoring patterns. The original jalousie windows common throughout the city - louvered glass panels in aluminum frames - provide no wind-borne debris protection and cannot be grandfathered under current Broward County permit rules. Window Installation covers our full process from measured survey to documented photo record.
We see three conditions repeatedly in Wilton Manors: frame rust-out at the sill from decades of condensation drainage failure, rough openings 1/2 to 3/4 inch out of square from original block construction tolerances, and neighbors on zero-lot lines requiring material hoisting rather than ground staging. Each condition is noted on the measured survey the customer keeps, with the written scope built from that document alone.
Single & Double Hung Windows
Signs you need it
Original jalousie or metal awning windows show visible frame corrosion, cracked louvers, or air infiltration that raises cooling load measurably.
What it costs in Wilton Manors
Single and double hung impact window installation in Wilton Manors typically ranges from $650 to $1,400 per opening for standard vinyl-framed units, with custom sizing or masonry modification adding $150-$400 per opening.
How we do it
We measure the rough opening to 1/8 inch, specify the frame with corrosion-resistant hardware for brackish-air exposure, install with tapcon anchoring into the CBS lintel and sill, then seal with backer rod and polyurethane sealant per manufacturer detail.
Horizontal Roller Windows
Signs you need it
Existing horizontal sliders have bent tracks, cracked rollers, or single-pane glass that rattles during afternoon thunderstorms common to the Middle River corridor.
What it costs in Wilton Manors
Horizontal roller impact window installation in Wilton Manors typically ranges from $700 to $1,550 per opening, with stainless steel rollers and marine-grade locks specified as standard given local corrosion rates.
How we do it
We document the track depth and sill condition on the measured survey, order the unit with stainless roller assembly and laminated glazing, then install with integrated nailing fin flashed to the CBS substrate using self-adhered membrane.
What Window Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Impact Window | $650 - $1,400 per opening |
| Horizontal Roller Impact Window | $700 - $1,550 per opening |
| Custom sizing or masonry modification | $150 - $400 per opening |
How long does window installation take in Wilton Manors?
Most Wilton Manors window installations complete in one to two days for a full-home replacement of 8-12 openings, with permitting through Broward County adding 5-10 business days before work can begin. Call (561) 200-8592 to schedule your measured survey and receive a written timeline with your quote.
Will my jalousie windows pass inspection if I repair instead of replace?
No - jalousie windows do not carry Florida Product Approval for wind-borne debris resistance and cannot be permitted as repair in Broward County; replacement with impact-rated units is mandatory for any permitted work. We provide the product approval documentation with every quote.
Door Installation in Wilton Manors
Door installation in Wilton Manors means replacing hollow-core exterior doors and corroded aluminum frames in CBS ranch homes with impact-rated entry systems that meet Broward County code. The original doors common in this 1950s-60s housing stock - lightweight flush doors in uninsulated frames - provide no wind-borne debris protection and typically show frame rust-out at the threshold from decades of moisture wicking through the slab. Door Installation covers our full measured-survey process.
We see two conditions specific to this market: threshold corrosion accelerated by the high water table and brackish-air exposure along the Middle River corridor, and sidelite or transom configurations that require custom sizing because original rough openings predate standard fiberglass door dimensions. Both conditions are documented on the measured survey the customer keeps.
Entry Doors
Signs you need it
The door slab shows delamination, the frame pulls away from the CBS reveal, or daylight is visible around the weatherstripping during blower door testing.
What it costs in Wilton Manors
Impact-rated fiberglass entry door installation in Wilton Manors typically ranges from $1,200 to $2,800 including frame, hardware, and installation, with Therma-Tru and ViewLux lines specified by performance tier.
How we do it
We measure the rough opening and slab swing, specify a fiberglass unit with composite jamb and stainless hinges, install with tapcon anchoring into the CBS and composite shims, then seal with backer rod and polyurethane sealant.
Hurricane-Proof Front & Entry Doors
Signs you need it
Broward County permitting requires Miami-Dade or Florida Product Approval for any exterior door replacement, and the existing door lacks visible approval labeling or has been modified with non-rated glass inserts.
What it costs in Wilton Manors
Hurricane-rated front door systems in Wilton Manors typically range from $1,800 to $3,500 including impact-rated glass, multi-point locking, and installation, with documentation provided for permit inspection.
How we do it
We verify the product approval number against Broward County’s database, document the existing rough opening and reinforcement needs on the measured survey, install with engineered anchoring per the NOA detail, and leave the photo record and documentation with the customer.
What Door Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Impact-Rated Fiberglass Entry Door | $1,200 - $2,800 per door |
| Hurricane-Rated Front Door System | $1,800 - $3,500 per door |
| Sidelite or transom modification | $400 - $900 per opening |
Do I need a permit to replace my front door in Wilton Manors?
Yes - Broward County requires a permit for any exterior door replacement, and the installed product must carry Miami-Dade or Florida Product Approval; we pull the permit and schedule inspection as part of every job. Call (561) 200-8592 and we will confirm the approval status of any product you are considering.
Can I keep my existing frame and just replace the door slab?
No - the frame and anchoring system must be rated as an assembly under Florida Product Approval rules, and 1950s-60s frames in Wilton Manors typically lack the reinforcement or corrosion resistance required for compliance; we replace frame, hardware, and slab as a system.
Energy-Efficient Windows in Wilton Manors
Energy-efficient window installation in Wilton Manors addresses the specific thermal burden of single-pane jalousie and metal awning windows common in 1950s-60s CBS ranch homes. The original glazing in this housing stock - typically 1/8-inch single pane in uninsulated aluminum frames - transmits heat directly into conditioned space, and the metal-to-metal conduction at the frame edge creates localized condensation that accelerates sill corrosion in the humid Middle River corridor. Energy-Efficient Windows details our full product specification process.
We specify energy performance by the numbers that matter in this climate: U-factor below 0.30 for thermal transmittance, SHGC below 0.25 for solar heat gain blocking, and air infiltration rate below 0.3 cfm/sf. Every specification is documented on the measured survey with the projected performance calculated for the specific orientation of each opening.
Low-E & Argon Gas Glass
Signs you need it
Rooms with west or south-facing original windows show temperature spikes 8-12 degrees above the thermostat setpoint during afternoon hours, or condensation forms on the interior glass surface below 65 degrees outdoor temperature.
What it costs in Wilton Manors
Low-E with argon gas fill in impact-rated vinyl framing typically adds $80-$150 per opening above standard clear glass in Wilton Manors, with payback periods of 4-7 years based on FPL rate structures for this market.
How we do it
We calculate the solar heat gain coefficient and U-factor for each orientation on the measured survey, specify the appropriate low-E coating and argon fill from the manufacturer’s performance matrix, and verify the IG unit seal date before installation.
ENERGY STAR Replacement Windows
Signs you need it
The existing windows lack NFRC labels, the home fails to qualify for FPL energy efficiency rebates, or cooling costs exceed $0.14 per square foot of conditioned space annually in Wilton Manors’s climate zone.
What it costs in Wilton Manors
ENERGY STAR certified impact window systems in Wilton Manors typically range from $750 to $1,650 per opening installed, with ECO Window Systems and CWS lines meeting the certification at multiple price tiers.
How we do it
We verify the NFRC certification number against the EPA database, document the performance values on the measured survey, install with proper flashing integration to prevent air leakage at the frame perimeter, and leave the certification documentation with the customer.
What Energy-Efficient Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Low-E/Argon Upgrade (add to base window) | $80 - $150 per opening |
| ENERGY STAR Impact Window System | $750 - $1,650 per opening |
| UV-blocking specialty coating | $120 - $220 per opening |
Will energy-efficient windows lower my FPL bill in Wilton Manors?
Yes - replacing single-pane metal windows with low-E, argon-filled impact units typically reduces cooling load 15-25% in Wilton Manors’s CBS ranch homes, with actual savings depending on shading, orientation, and existing insulation. Call (561) 200-8592 and we will calculate projected savings from your measured survey.
Does ENERGY STAR certification matter for Florida’s climate?
Yes - ENERGY STAR criteria for South Florida require lower SHGC than the national standard, which directly addresses solar heat gain; we specify only products that meet the South Florida climate zone requirements, not the generic certification.
Impact Garage Doors in Wilton Manors
Impact garage door installation in Wilton Manors protects the largest opening in most CBS ranch homes - typically a 16-foot wide double-car bay - against wind-borne debris and pressure differential failure during hurricane events. The original garage doors in this 1950s-60s housing stock were uninsulated, non-rated panels in lightweight track systems that provide no wind-load resistance; many have been replaced at least once with standard non-impact units that still fail Broward County code for any permitted work. Impact Garage Doors covers our full specification and installation process.
We see two conditions specific to Wilton Manors: track corrosion from brackish-air exposure that causes roller binding and opener strain, and header framing in original CBS construction that lacks the reinforcement required for wind-rated door loads. Both are documented on the measured survey with the structural remediation specified before the door is ordered.
Hurricane-Rated Garage Doors
Signs you need it
The existing garage door lacks Miami-Dade or Florida Product Approval labeling, the panels flex visibly in moderate winds, or the track system shows rust-through at the vertical sections.
What it costs in Wilton Manors
Hurricane-rated garage door systems in Wilton Manors typically range from $2,200 to $4,500 for a standard 16-foot double-car opening, including wind-rated panels, reinforced track, and impact-resistant glazing if specified.
How we do it
We measure the opening width, headroom, and side-room clearance, verify the header capacity and specify reinforcement if needed, install the wind-rated panel and track system per the NOA detail, and document the installation with photo record and approval paperwork.
Wind-Load Code Compliance
Signs you need it
Broward County permitting requires wind-load documentation for any garage door replacement, and the existing installation predates the 2002 Florida Building Code or lacks visible product approval.
What it costs in Wilton Manors
Wind-load code compliance upgrades including structural reinforcement, permit, and inspection typically add $400-$900 to the base door installation in Wilton Manors, with the total documented on the written quote before work begins.
How we do it
We verify the design wind speed for the Wilton Manors address, specify the door and track system to meet or exceed that load, pull the permit with structural details, install per the engineer’s sequence, and pass final inspection with documentation provided.
What Impact Garage Doors Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-Rated Garage Door (16 ft) | $2,200 - $4,500 |
| Wind-Load Code Compliance Upgrade | $400 - $900 |
| Impact-Rated Glass Panel Section | $350 - $650 per section |
Do I need a permit to replace my garage door in Wilton Manors?
Yes - Broward County requires a permit for any garage door replacement, and the installed system must demonstrate compliance with the Florida Building Code wind-load requirements for your specific address; we handle permitting and inspection on every job. Call (561) 200-8592 to verify the requirements for your property.
Can I add windows to my impact garage door?
Yes - impact-rated garage doors can be specified with glazed sections using laminated glass that meets the same wind-borne debris standard as the door panel, though each glazed section adds cost and must be documented in the product approval; we specify these from Mr-Glass and ViewLux lines by performance tier.
Custom & Geometric Windows in Wilton Manors
Custom and geometric window installation in Wilton Manors solves the mismatch between 1950s-60s CBS ranch architecture and the standard rectangular units that dominate modern product lines. Original windows in this housing stock often include arched tops, radius corners, or grouped assemblies that were site-built from multiple jalousie units - configurations that cannot be replicated with stock impact-rated products and require custom fabrication to meet Broward County code. Custom & Geometric Windows covers our measured-survey and specification process for non-standard openings.
We see three custom conditions repeatedly in Wilton Manors: the half-round or quarter-round accent window above a standard rectangular unit, the grouped three-lite assembly with mullions at non-standard spacing, and the oversized picture window that exceeds maximum stock unit dimensions. Each requires field verification to 1/16 inch, templating, and factory fabrication with lead times documented on the written quote.
Geometric & Shaped Windows
Signs you need it
The existing window has a curved top, angled sides, or other non-rectilinear shape that stock replacement units cannot replicate, or the opening was originally field-fabricated from multiple small units that must now be replaced with a single rated assembly.
What it costs in Wilton Manors
Geometric and shaped impact windows in Wilton Manors typically range from $1,400 to $3,200 per opening, with the premium over standard rectangular units reflecting custom template fabrication, factory lead time, and specialized installation sequencing.
How we do it
We create a field template of the exact opening profile, transmit the template to the manufacturer for CAD verification, receive the custom unit with impact-rated glazing and reinforced frame, and install with shimming and anchoring specific to the non-standard geometry.
Oversized Openings
Signs you need it
The existing window exceeds 60 inches in either dimension or 25 square feet total area, exceeding the maximum stock unit size from most impact-rated manufacturers and requiring custom engineering for wind-load resistance.
What it costs in Wilton Manors
Oversized custom impact windows in Wilton Manors typically range from $2,000 to $4,800 per opening, with engineering review, reinforced framing, and crane or hoist installation potentially adding $500-$1,200 depending on site access.
How we do it
We document the exact dimensions and structural loads on the measured survey, engage the manufacturer’s engineering department for wind-load analysis, specify reinforced mullions or frame sections as required, and coordinate hoisting or material staging for units that cannot be hand-carried through standard residential access.
What Custom & Geometric Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Geometric/Shaped Impact Window | $1,400 - $3,200 per opening |
| Oversized Custom Impact Window | $2,000 - $4,800 per opening |
| Hoist/crane or specialized access | $500 - $1,200 per job |
How long do custom windows take to manufacture?
Custom geometric and oversized impact windows typically require 6-10 weeks from measured survey to delivery in Wilton Manors, with the exact lead time named on the written quote before the order is placed; we do not begin fabrication until the customer approves the template and price. Call (561) 200-8592 to schedule template measurement.
Can you match the curved top of my original 1958 window?
Yes - we template the exact radius or profile of the original opening and fabricate a replacement with impact-rated laminated glass in a custom-formed frame, with the template and CAD drawing provided for customer approval before production begins.
Brands We Service in Wilton Manors
We install and service eight manufacturer lines in Wilton Manors - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - with parts stocked locally for warranty and repair calls. Most common hardware, screen, and glazing components turn within 48 hours; specialized factory orders follow the manufacturer’s stated lead time. See our brands for full product specifications and performance tiers.
Pricing for Windows & Doors in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Impact Window | $650 - $1,400 per opening |
| Horizontal Roller Impact Window | $700 - $1,550 per opening |
| Custom sizing or masonry modification | $150 - $400 per opening |
| Impact-Rated Fiberglass Entry Door | $1,200 - $2,800 per door |
| Hurricane-Rated Front Door System | $1,800 - $3,500 per door |
| Sidelite or transom modification | $400 - $900 per opening |
| Low-E/Argon Upgrade | $80 - $150 per opening |
| ENERGY STAR Impact Window System | $750 - $1,650 per opening |
| Hurricane-Rated Garage Door (16 ft) | $2,200 - $4,500 |
| Wind-Load Code Compliance Upgrade | $400 - $900 |
| Geometric/Shaped Impact Window | $1,400 - $3,200 per opening |
| Oversized Custom Impact Window | $2,000 - $4,800 per opening |
Three factors push price upward in Wilton Manors: custom sizing required by non-standard 1950s-60s rough openings, corrosion-resistant hardware specification for brackish-air exposure, and structural reinforcement of original CBS framing for wind-rated loads. The written quote you receive after our measured survey is the final price - Haven Clause 1 means the measurement and the invoice are the same document.
Neighborhoods We Serve in Wilton Manors
We work across Wilton Manors’s full residential grid, from the canal-front properties along the Middle River to the interior blocks between Wilton Drive and Powerline Road. Crews dispatch from our Miami office with material staged for the specific job; most Wilton Manors addresses are reached within 30 minutes during standard scheduling hours.
- Middle River Estates (canal-adjacent CBS ranches)
- Wilton Drive corridor (interior ranch homes)
- Powerline Road area (1950s-60s subdivisions)
- North Wilton Manors (near Oakland Park border)
- Andrews Avenue corridor (original plat blocks)
Service Area - Cities Near Wilton Manors
We install and replace windows and doors throughout Broward and northern Miami-Dade counties, with crews serving Boca Raton, FL, Deerfield Beach, FL, Delray Beach, FL, and Lighthouse Point, FL from the same dispatch base. Every job in these markets follows the same Haven Standard: measured survey, written price before work starts, verified crew, and documented photo record on completion.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wilton Manors
Yes - we pull all required Broward County permits for window and door replacement in Wilton Manors, schedule inspections, and provide the approved documentation at job completion; permit fees are itemized on the written quote, not added later.
Clear access to all windows and doors being considered, unlock any gates for exterior access, and have any prior estimates or inspection reports available for our review; the survey takes 45-90 minutes for a typical Wilton Manors ranch home, and you keep the measured document.
If any installation defect appears within one year of completion, we return to correct it at no charge - this is Haven Clause 5, written into every contract, not a verbal courtesy; the promise is documented with the photo record we leave at every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.