Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Trusted Door Installation for Boca Raton Homeowners
A properly installed door in Boca Raton must seal against salt air, withstand hurricane-force pressure cycles, and operate square in a frame that shifts with Florida’s humidity and limestone substrate. Since 2012, Sightline Windows & Doors has installed and replaced doors across Boca Raton under the Haven Standard, with every job beginning from a measured survey the customer keeps and ending with a documented photo record. Call (561) 200-8592 to schedule your free estimate; a live person answers at any hour.
We see the same pattern in door installation in Boca Raton: homeowners who bought between 2015 and 2025, often in neighborhoods like Boca Falls, Woodfield Country Club, or the downtown condo corridor, discover their original builder-grade doors failing at the weatherstrip, sagging on hinges set too shallow into MDF casing, or revealing daylight at the jamb after a few seasons of thermal expansion. The fix is not a thicker door slab; it is a measured opening, a specified product matched to that exact sightline, and an installation documented at every step. That is Haven Clause 1 (Have it in writing), Haven Clause 3 (Verified crews), and Haven Clause 4 (Evidence on every job) - the standard we have applied to 18,000+ openings since founding.
What Our Door Installation Service Includes
Entry Doors
An entry door is the primary operable barrier between conditioned interior space and exterior conditions. In Boca Raton, that means managing solar heat gain on east and west exposures, blocking wind-driven rain at 120+ mph, and maintaining security against forced entry. We measure the rough opening to 1/16 inch, specify the slab, frame, and hardware as a system, and install with shims placed at hinge locations and lock strike points - not random spacing. Our entry door installations include a written scope, the measured survey you keep, and a photo record of frame plumb, shim placement, and final weatherstrip compression.

Hurricane-Proof Front & Entry Doors
Hurricane-proof front and entry doors in Boca Raton must meet Florida Building Code TAS 201, HVHZ (High Velocity Hurricane Zone) requirements for wind-borne debris resistance. These are not standard doors with added hardware; they are engineered systems with impact-rated glazing, reinforced stiles, and multipoint locking hardware tested to ASTM E1886 and E1996. We specify PGT, CGI, or CWS impact-rated entry systems for Boca Raton homes, with laminated glass interlayers that retain shard adhesion after impact. Every hurricane-proof door installation includes permit application, inspection scheduling, and the documentation required for wind mitigation insurance discounts. We have completed these installations from Ocean Breeze to Boca Pointe, where the inland location does not exempt a property from HVHZ compliance.

French & Double Doors
French and double doors present a specific failure mode: the inactive leaf carries the weatherstrip burden, and without proper astragal alignment and flush bolt engagement, both leaves leak. In Boca Raton’s coastal climate, we regularly find original French doors in Mizner Park-area renovations with rotted sill pans beneath the threshold and no end dams to direct water outward. Our installation includes a pre-hung frame with integrated sill pan, adjustable hinges for seasonal settling, and multipoint hardware that draws both leaves into compression simultaneously. We document the sightline - the visible gap between leaves when closed - at 1/8 inch or less, measured top, middle, and bottom.

Replacement Doors
Door replacement becomes necessary when the existing unit exceeds repair economics: frame rot extending beyond jamb legs, slab delamination, or hardware mortises worn beyond retrofit. In Boca Raton’s 1980s-2000s housing stock, particularly in neighborhoods like Whisper Walk and Boca Del Mar, we encounter steel entry doors with rust jacking at the bottom rail and fiberglass units with UV-chalked gel coats. Our replacement process begins with forensic measurement of the existing rough opening, not the frame - because the frame may be out of square. We specify the replacement unit by performance tier: impact-rated for HVHZ zones, energy-efficient with low-U-factor cores for west-facing exposures, or standard duty for interior garage access. The written quote derives from the measured survey and cannot change; Haven Clause 1.

Storm & Exterior Doors
Storm and exterior doors are secondary barriers, but their installation quality determines whether the primary door’s weatherstrip survives. A storm door mounted out of plane with the primary door creates a bellows effect in wind, accelerating seal wear. In Boca Raton, where afternoon thunderstorms arrive with horizontal rain, we install storm doors with proper drip caps, hinge-side Z-bars sealed with backer rod and sealant, and sweep adjustments that clear the threshold without dragging. For homes near the Intracoastal or in beachfront zones, we specify aluminum construction with stainless steel fasteners; the salt air at 1,000 feet from the water line corrodes standard hardware within three seasons. Our installations include a written note on sweep height and seasonal adjustment schedule.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Door Installation

We install and service eight manufacturer lines, specified by what the opening requires, not by warehouse inventory. For entry and hurricane-rated systems, we work with PGT and CGI, both Florida manufacturers with HVHZ-tested assemblies we have installed from Boca Raton to Deerfield Beach. Therma-Tru fiberglass entry systems are our specification for energy-efficient replacements in west-facing Boca Raton homes, where their low-U-factor cores and proprietary composite frames resist the thermal bowing we measure in lesser products after two summers. ES Windows and ECO Window Systems provide aluminum impact-rated frames with thermal breaks, specified for coastal exposure where conductivity management matters as much as impact resistance. Mr-Glass supplies laminated impact glazing for custom door lites and sidelites, with interlayer thicknesses we document by job for insurance records. CWS and ViewLux round out our available lines for mid-tier and value-specified replacements.
Whether you have a Therma-Tru fiberglass unit needing slab replacement, an ES Windows impact-rated system requiring hardware upgrade, or any other make, we can help. Our technicians carry manufacturer-specific installation manuals and maintain direct technical support lines with each brand. We do not guess at trim compatibility or hardware backset; we verify against the original specification sheet, or we measure and document the replacement requirement in writing before ordering.
Before
AfterSigns You Need Door Installation Right Now
- Visible daylight at the jamb or threshold. A properly installed door compresses weatherstrip uniformly around the perimeter. Daylight indicates frame shift, hinge wear, or weatherstrip compression set. In Boca Raton’s limestone substrate, foundation settling is common; the door frame does not settle with it, and the resulting gap admits humid air that drives cooling load and can support mold at the sill plate.
- Difficulty latching or deadbolt misalignment. When a door that once latched smoothly now requires shoulder pressure or lift, the frame has racked or the hinges have elongated their screw holes. This is not a hardware problem; it is an installation geometry problem. Forced closure accelerates wear on the multipoint hardware in impact-rated doors, where replacement lock cases run $200-$400 before labor.
- Water staining at the interior sill or baseboard. Water entry at a door threshold in Boca Raton indicates failed sill pan integration, missing end dams, or sealant degradation at the frame-to-stucco interface. We regularly find this in homes west of Military Trail, where afternoon thunderstorms drive rain against the door face. The damage extends beyond finish carpentry; wet framing attracts termites and compromises structural integrity.
- Corroded hardware or frame pitting. Salt air within two miles of the Atlantic accelerates galvanic corrosion at aluminum-steel interfaces. Pitted frames lose wall thickness; corroded hinges operate with increased friction that transfers load to screw attachments. We specify 316 stainless hardware for coastal Boca Raton installations and document fastener material in the written scope.
- Increased cooling bills with no HVAC explanation. A door with failed weatherstrip or poor installation creates a continuous infiltration path. We measure this with a blower door during comprehensive assessments: a single 1/16-inch gap around a 3-foot by 6-foot door equals approximately 14 square inches of open area. In Boca Raton’s cooling-dominated climate, that is measurable kilowatt-hours.
Our Door Installation Process - Step by Step

- 1
Measured survey and written scope. Our technician arrives in uniform, with license number provided in advance per Haven Clause 3. We measure the rough opening width at top, middle, and bottom; height at both jambs and center; and diagonals to check square. We photograph existing conditions, note substrate type (stucco, frame, block), and record exposure orientation. You keep the measured survey; the written quote derives from it and cannot differ.
- 2
Product specification by performance tier. Based on the survey, we specify the door system: impact-rated for HVHZ compliance, energy-efficient for load management, or standard duty for protected exposures. We name the manufacturer line - PGT, CGI, Therma-Tru, ES Windows, ECO Window Systems, Mr-Glass, CWS, or ViewLux - and explain the specification in plain terms: U-factor for thermal performance, SHGC for solar gain, design pressure rating for wind load. You approve in writing before order.
- 3
Permit application and inspection scheduling. For impact-rated and HVHZ installations, we pull permits through the City of Boca Raton or Palm Beach County as jurisdiction requires. We schedule rough and final inspections before work begins, so the timeline is known, not estimated. You receive permit numbers and inspector contact information in your documentation packet.
- 4
Installation with photographic documentation. Our crew installs to manufacturer specification, with shims at structural points, fasteners at proper depth and spacing, and sealant applied to a clean, primed substrate. We photograph frame plumb, shim placement, hardware engagement, and weatherstrip compression. These images populate your documented photo record, delivered with the final invoice.
- 5
Final inspection, walkthrough, and warranty registration. We operate the door through full cycles, verify latch and lock function, and review the photo record with you. We register manufacturer warranties and document the 365-Day Done Right Promise under Haven Clause 5 (No surprises). The final invoice matches the written quote; the measured survey, photo record, and warranty documents are yours to keep.
How Much Does Door Installation Cost in Boca Raton?
A standard entry door replacement in Boca Raton, including pre-hung fiberglass slab, composite frame, and basic hardware, typically runs $1,800-$3,200 installed. Hurricane-proof front door systems with impact-rated glazing and multipoint hardware range $3,500-$7,500 depending on lite configuration and design pressure rating. French and double door installations, with astragal integration and sill pan work, generally fall between $2,800-$5,500. Storm door additions, mounted to existing primary door frames with proper drip cap and Z-bar, typically cost $800-$1,600.
| Door Type | Typical Range | Primary Cost Drivers |
|---|---|---|
| Standard Entry Door Replacement | $1,800 - $3,200 | Slab material, hardware grade, frame condition |
| Hurricane-Proof Front/Entry Door | $3,500 - $7,500 | Impact rating, glazing area, DP rating, permit/inspection |
| French/Double Door Installation | $2,800 - $5,500 | Astragal type, sill pan complexity, hardware |
| Storm/Exterior Door Addition | $800 - $1,600 | Frame material, screen configuration, coastal hardware |
| Replacement Door (existing frame reuse) | $1,200 - $2,400 | Slab size, bore prep, hinge mortise match |
Several factors move these ranges. Frame rot requiring full rough opening reconstruction adds $400-$1,200. Stucco repair and finish matching after frame replacement runs $300-$800. Impact-rated installations in HVHZ zones require permit and inspection fees, typically $150-$350, included in our written scope. Homes in east Boca Raton, from Palmetto Park Road to the beach, may require stainless hardware upgrade; this is specified in writing, not added later.
To avoid overpaying, obtain a written scope that specifies manufacturer, model, hardware schedule, and installation detail. A quote that names only “installed” invites substitution. Our written quote includes line-item material, labor, permit, and documentation costs; the measured survey you receive at estimate prevents scope expansion. We also offer a Free Second Opinion on Any Written Estimate - bring us a competitor’s quote and we will review it at no charge, identifying specification gaps or over-specification that drives unnecessary cost.
Call (561) 200-8592 for an exact quote on your door installation; estimates are free and include the measured survey you keep.
Door Installation Near Boca Raton - Our Service Area

We install and replace doors throughout Palm Beach and northern Broward counties, with regular work in Deerfield Beach, Delray Beach, Lighthouse Point, Coconut Creek, Pompano Beach, Parkland, Margate, Boynton Beach, Coral Springs, North Lauderdale, and Oakland Park. Response to Boca Raton addresses is typically same-week for estimates, with installation scheduling based on product lead time and permit status. Homes in west Boca Raton - beyond Lyons Road - and in gated communities like The Oaks or St. Andrews Country Club require advance security clearance; we coordinate this at estimate scheduling. For door installation in Delray Beach or Deerfield Beach, the same Haven Standard, measured survey process, and documented photo record apply.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Door Installation in Boca Raton

Door installation is the complete process of fitting a door slab within a frame, securing that frame to structural opening members, and integrating weatherstrip, hardware, and finish trim to create an operable, sealed barrier. At Sightline Windows & Doors, door installation includes measured survey, written scope, permit handling where required, manufacturer-specified installation, inspection coordination, and documented photo record. Call (561) 200-8592 to schedule your free estimate.
A standard pre-hung entry door replacement takes 4-6 hours; hurricane-rated systems with impact glazing and multipoint hardware require 6-10 hours; French and double door installations typically need a full day including sill pan work. Permitted installations in Boca Raton add inspection scheduling time, typically 2-5 business days for rough and final inspections. We specify the timeline in writing at estimate, with no open-ended scheduling. Call (561) 200-8592 for timeline specifics on your project.
Standard entry door installation in Boca Raton runs $1,800-$3,200; hurricane-proof systems range $3,500-$7,500; French and double doors fall between $2,800-$5,500; storm door additions cost $800-$1,600. Final price depends on product specification, frame condition, and permit requirements. Our written quote, derived from the measured survey you keep, lists every line item before work begins. Call (561) 200-8592 for an exact quote - estimates are free.
Yes, we install and service Therma-Tru fiberglass entry systems, including their Classic-Craft and Fiber-Classic lines with proprietary composite frames. We maintain direct technical support with Therma-Tru and carry their hardware specifications for bore prep, hinge location, and threshold integration. For Therma-Tru warranty registration, we document installation with manufacturer-required photos and complete submission on your behalf. Call (561) 200-8592 to discuss Therma-Tru specification for your opening.
We do not offer same-day installation for planned door replacements; proper specification, ordering, and permit handling require lead time. For security-compromised situations - forced entry damage, storm breach, or structural failure - we provide emergency board-up and temporary securing, with permanent installation scheduled through our standard process. Live phone coverage is available 24/7 at (561) 200-8592 to assess urgency and dispatch appropriate response.
Every door installation is covered by the 365-Day Done Right Promise under the Haven Standard: if it’s not done right, we make it right, with no deductible or service fee. Manufacturer warranties vary by product line - Therma-Tru offers lifetime limited on fiberglass slabs, PGT and CGI provide 10-year glass breakage and 20-year frame warranties - and we register all warranties with documentation submitted on your behalf. The documented photo record from your installation serves as evidence for any warranty claim. Call (561) 200-8592 for warranty specifics by product line.
Clear the interior path from entry to the work area, remove wall hangings adjacent to the door frame, and secure pets in a separate room. We handle furniture protection, dust containment, and debris removal as standard. For permitted installations, ensure access for the inspector on scheduled dates; we provide inspection windows 48 hours in advance. If you have a competitor’s written estimate, bring it for our Free Second Opinion review. Call (561) 200-8592 to schedule and receive preparation specifics for your project.
Schedule Your Door Installation Service in Boca Raton Today
Call (561) 200-8592 to schedule your free estimate. A live person answers at any hour. We will arrive with a license-verified, uniformed technician, conduct a measured survey you keep, and provide a written quote that cannot change. Every installation carries the 365-Day Done Right Promise and leaves a documented photo record. No obligation, no urgency theatre, no surprise additions. Just the Haven Standard, applied to your door.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Boca Raton since 2012.










Before
After
Before
After