Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Sliding & Patio Doors: The Boca Raton Owner’s Guide
We stock and install Therma-Tru-compatible sliding and patio door systems in Boca Raton, with typical installed pricing from $2,800 to $5,400 depending on the series, glass package, and whether the opening needs reframing. Most Therma-Tru sliding door replacements in Boca Raton are surveyed, quoted, and scheduled within 48 hours. Homeowners usually discover the problem when the panel sticks in the track during humid months, the lockset no longer catches, or daylight shows between the sash and the jamb where the weatherstrip has compressed.
Which Therma-Tru Models This Applies To
Therma-Tru organizes its sliding and patio door offerings into distinct series, and the part you need depends on which frame profile you have. The Impact-Gard and Standard-Gard sliding door systems are the two most common in Boca Raton homes built between 2015 and 2022. Check the hinge stile or the top track for a stamped series mark, or look for the white adhesive label on the glass spacer bar; it lists the NFRC certification number, which we can cross-reference to the original shop drawing.
The sliding panel roller assembly differs between Impact-Gard (heavy-duty tandem roller, 1-1/4 inch wheel diameter, rated for 250 lbs per panel) and Standard-Gard (single roller, 1-inch wheel). Using the wrong roller chews the track in one season of Boca Raton’s salt-air environment. We carry both on the truck, plus the multi-point lock actuator and tandem roller housing that fail most often.
OEM Therma-Tru parts ship from Ohio with a 10-14 day lead time. We stock quality aftermarket equivalents that meet the same load and cycle ratings, and we note the source on your written quote. If you want OEM, we order it; if you want the part this week, the aftermarket option is in our Boca Raton warehouse. Sightline Windows & Doors Boca Raton is an independent service provider, not affiliated with Therma-Tru.
Signs Your Therma-Tru Sliding & Patio Door Is Failing

- The panel drags or requires shoulder force to move. This usually means the tandem roller assembly has flat-spotted or the axle has corroded. In Boca Raton, we see this accelerate when irrigation spray hits the track daily; the hard water deposits pit the stainless surface, and the roller loses its smooth running surface.
- Lock handle turns but the bolts do not extend into the keeper. The multi-point lock actuator, a plastic gearbox inside the mortise pocket, has stripped its internal cam. Therma-Tru uses a specific 45-degree throw angle; generic replacements often bind because the cam timing is off by five degrees.
- Visible gap at the meeting stile when the door is “closed.” The interlock weatherstrip has taken a compression set, or the panel has dropped on worn rollers and no longer aligns with the fixed panel. In either case, you’re losing conditioned air and gaining noise.
- Water pools on the interior track after a Boca Raton downpour. The weep holes in the sill are clogged with sand and organic debris, or the sill pan flashing was never properly sealed to the subfloor. This is not a part failure alone; it’s an installation detail that needs correction.
- Condensation between the glass panes. The insulated glass unit (IGU) has lost its seal. Therma-Tru IGUs with Low-E and argon fill carry a 20-year limited warranty, but the labor to swap the sash is not covered after year one. We document the seal failure with photos for your warranty claim.
Before
AfterReplacement Cost & What’s Included
| Component | Parts + Labor Range | Notes |
|---|---|---|
| Tandem roller assembly (pair) | $340-$480 | Includes track cleaning, roller alignment, operation test |
| Multi-point lock actuator | $280-$420 | OEM or spec-matched aftermarket; handle set extra if corroded |
| Interlock weatherstrip replacement | $180-$290 | Per panel; exact profile match required |
| Full panel replacement (IGU failure) | $890-$1,400 | Reuses existing frame; new glass package with documented U-factor/SHGC |
| Complete Therma-Tru sliding door system | $2,800-$5,400 | Includes measured survey, written scope, permit if required, photo record |
What drives the range: the series (Impact-Gard costs more than Standard-Gard), the glass package (impact-rated laminated glass vs. standard IG), and whether the rough opening is out of square. We find that in Boca Raton’s Broken Sound and Royal Palm Yacht & Country Club areas, stucco returns and tile thresholds often need adjustment, which we document in the measured survey you keep. The price we write is the price on the final invoice; Haven Clause 1, Have it in writing, means no change orders for conditions we should have caught.
Every Therma-Tru sliding door job carries our 365-Day Done Right Promise. If the roller drags, the lock binds, or the weatherstrip leaks in that first year, we return and correct it. The warranty is written into the Haven Standard, not offered as a courtesy.
DIY or Call Us?

There is one thing a homeowner can safely check: the weep holes. Run a piece of wire or a pipe cleaner through the slots in the exterior sill. If water flows out, you’ve solved the pooling problem. If it doesn’t, the internal channels may be packed with construction debris from 2017, and flushing them requires removing the sill cover.
Everything else on a Therma-Tru sliding door carries injury or damage risk. The impact-rated panels weigh 180 to 240 pounds each; lifting one off the track without proper support risks back injury and frame damage. The multi-point lock actuator sits behind a mortise pocket that requires precise routing; a slip with a chisel destroys the stile. And the tandem roller adjustment screw, if turned the wrong direction, drops the panel onto the track and dents the running surface.
We don’t recommend DIY roller or lock replacement on these units. The measurement matters more than the muscle. Sonia Raman and our crew have replaced Therma-Tru sliding doors across Boca Raton; we bring the right shim pack, the right fastener length for your substrate, and the documentation that the manufacturer expects if a warranty issue arises later. Call (561) 200-8592 to schedule your free estimate.
FAQs
In Boca Raton’s salt-air climate, with routine irrigation exposure, tandem rollers typically last 8 to 12 years before flat-spotting or corrosion binding. Homes within two miles of the Intracoastal see the shorter end of that range. Call (561) 200-8592 for an exact quote on replacement; estimates are free.
Sometimes the actuator gearbox can be lubricated and the cam timing reset, but once the internal plastic gears strip, replacement is the only reliable fix. We carry both repair parts and full actuators on our truck and will show you the failed component before quoting. Call (561) 200-8592 for an exact quote; estimates are free.
Most replacements are completed in one day, with the second day reserved for trim, sealant cure, and final operation testing. If the rough opening needs reframing or stucco repair, we add a day and note it in the written scope before any work starts. Call (561) 200-8592 to schedule your free estimate.
We stock the most common failure items: tandem roller assemblies, multi-point lock actuators, interlock weatherstrip profiles, and replacement IGU sash packs for both Impact-Gard and Standard-Gard series. OEM special-order parts arrive in 10-14 days; we tell you which is which before you decide. Call (561) 200-8592 for an exact quote; estimates are free.
Key Takeaways

- Therma-Tru sliding door parts are series-specific; the Impact-Gard and Standard-Gard rollers are not interchangeable.
- Most failures in Boca Raton trace to salt-air corrosion, hard water track damage, or compression-set weatherstrip.
- We stock common parts locally and document every replacement with the measured survey, written scope, and photo record you keep.
- The price we write before work starts is the price on the final invoice; Haven Clause 1, Have it in writing.
Ready to get your Therma-Tru sliding door measured and priced? Call (561) 200-8592. A live person answers, 24/7. We’ll schedule a measured survey, leave you with the written scope, and quote the exact price before any work starts. Measure it twice, write it down, then we can talk price.
Written by Sonia Raman, Owner, Sightline Windows & Doors Boca Raton at Sightline Windows & Doors Boca Raton, serving Boca Raton and nearby areas.










Before
After
Before
After