Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Energy-Efficient Windows in Boca Raton: What to Know First
We install and service Therma-Tru energy-efficient windows in Boca Raton as an independent provider, not a factory-authorized dealer. A typical Therma-Tru replacement or upgrade runs $380 to $720 per opening depending on the series, glass package, and whether the frame needs reworking. We write the price before we lift a tool, and that written quote is the same document we use to order glass and cut invoice.
This page is for Therma-Tru owners in Boca Raton whose windows are fogging between panes, whose Low-E coating has degraded under South Florida UV, or whose argon gas has leaked and the U-factor has climbed past what ENERGY STAR allows. If you’re pricing options before you commit, call us at (561) 200-8592. We’ll measure, write it down, and hand you a scope with a price you can compare.
How Therma-Tru Products Fail - and How We Fix Them
- Classic-Craft and Fiber-Classic sash seal fatigue. The foam-core construction in these entry-door sidelights and transoms breathes with humidity shifts, and after six to eight years in Boca Raton’s salt-air cycle the bulb seal compresses permanently. We see this in oceanfront condos along A1A and in Spanish River Land. We replace with OEM-compatible compression seals sized to the original sightline, not universal retrofit strips that leave a gap at the lock stile.
- Decorative glass triple-pane delamination in the Canvas and Satin Etch collections. The lead-came simulation and resin textures trap heat at the glass edge; in south-exposure Boca Raton homes the inner lite cracks from thermal stress before the Low-E fails. We source tempered replacement lites from Therma-Tru’s OEM glass vendor when the pattern is still active, or we spec a compatible textured laminate from our ES Windows and CWS lines if the pattern is discontinued.
- Argon loss in Benchmark and Traditions vinyl double-hungs. These units ship with a 90% argon fill that leaks at the intercept spacer at roughly 1% per year in our climate. By year seven the U-factor has slipped from 0.30 to 0.34 or worse. We test with a deflectometer on site; if the reading is below 80% we quote a full sash replacement rather than a band-aid regas, because regassing a failed intercept spacer is temporary and we don’t write temporary fixes.
- Low-E coating oxidation on west-facing Smooth-Star and Pulse units. The sputtered silver layer breaks down where daily condensation sits against the interior surface, common in Boca Raton homes with oversized HVAC cycling. The symptom is a hazy iridescence that owners mistake for dirt. We document it with transmitted-light photography, spec a replacement IGU with a harder pyrolytic Low-E on surface #2, and note the orientation in our log so the next tech knows the history.
- Frame expansion noise in Profiles and Traditions vinyl lines. The multi-chamber profile grows 1/16 inch per 10 feet of frame in summer heat, and the factory glazing stops don’t allow for it. The result is a sharp click at 10 a.m. and again at 6 p.m. through August. We relieve the glazing pocket, replace the rigid stops with co-extruded flexible vinyl, and re-bed the IGU with a backer rod and neutral-cure silicone that moves with the frame instead of fighting it.
Our Therma-Tru Energy-Efficient Windows Process

- 1
Measured survey. Sonia Raman or a verified crew member arrives uniformed with license number visible, measures every opening to the nearest 1/8 inch, and records frame squareness, sill level, and existing glass thickness. You keep the survey sheet.
- 2
Diagnostic photography. We shoot transmitted and reflected light images of any fogging, coating damage, or seal failure, then pull the spacer bar code if the IGU is accessible to confirm the original build date and gas fill.
- 3
Parts decision. If Therma-Tru still produces the exact IGU or sash, we quote OEM. If the pattern or size is discontinued, we cross-reference against our PGT, CGI, CWS, and ES Windows lines for a performance-matched substitute and disclose the source in writing.
- 4
Written scope and price. Haven Clause 1: the measurement and the quote are the same document. No line item changes without a change order you sign.
- 5
Installation and testing. We install, seal, and flash to the original sightline. Post-install, we verify operation, check for air infiltration with a smoke pencil, and photograph the completed opening.
- 6
Documentation and promise. You receive the photo record, the final invoice matching the written scope, and the 365-Day Done Right Promise stamped under the Haven Standard. “Measure it twice, write it down, then we can talk price.” That is how we have handled every one of our 18,000+ openings since 2012.
Before
AfterWhat Therma-Tru Energy-Efficient Windows Costs in Boca Raton
| Scenario | Typical Range | What Moves the Price |
|---|---|---|
| Single IGU replacement, Benchmark/Traditions vinyl double-hung | $380 - $520 | Glass size, Low-E grade, whether the sash is welded or mechanically fastened |
| Sash replacement with new argon fill, Classic-Craft or Fiber-Classic | $540 - $720 | Core type (foam vs. steel-reinforced), decorative glass match, exterior trim rework |
| Full frame replacement, Smooth-Star or Pulse with upgraded glass package | $680 - $940 | Frame depth, impact-rated upgrade, stucco or drywall return repair |
| Multi-opening whole-home upgrade with energy audit documentation | $4,200 - $7,800 | Opening count, mix of fixed and operable units, permit requirements for Boca Raton |
These are 2024-2025 ranges for the Boca Raton market. Your price depends on what we measure, not what we guess. Call (561) 200-8592 to schedule your free estimate. Bring a competitor’s written quote and we’ll review it at no charge under our Free Second Opinion policy.
Why Boca Raton Homeowners Call Sightline Windows & Doors Boca Raton for Therma-Tru Work

We are independently owned and operated under the Haven Standard, not a franchise or a dealer network with quota pressure. Our technicians are background-checked, uniformed, and identified by license number before they arrive at your Boca Raton home. We carry eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - so if your Therma-Tru pattern is discontinued we have a documented alternative with matching U-factor and SHGC, not a shrug and a referral.
Every job leaves a photo record. Every invoice matches the written quote. The 365-Day Done Right Promise is stamped on the document, not offered as a favor. Sonia Raman keeps her running log of every unit by brand, glass package, U-factor, date, and customer name, because a warranty call in 2029 goes smoother when the paperwork from 2024 is intact.
FAQs
No, if the work is performed by a qualified glazier using OEM-compatible parts and documented in writing. Therma-Tru’s warranty covers defects in materials and workmanship; it does not require factory-authorized service for maintenance or IGU replacement. We note our work in our permanent log and provide you a copy for your records. Call (561) 200-8592 if you need help interpreting your warranty document.
A single IGU or sash replacement is usually completed in two to four hours on site. Full-frame replacements run one to two days depending on opening count and exterior finish repair. We do not promise same-day dispatch for planned work; we schedule to the measured survey, not to a sales calendar. Call (561) 200-8592 to book a measurement.
Repair makes sense when the frame is square, the hardware operates smoothly, and the failure is isolated to the glass package or seal. Replace when the frame has absorbed moisture (common in Fiber-Classic units with compromised edge seals), the hardware is obsolete, or the cumulative repair cost exceeds 60% of replacement. We write both options with prices when the condition is borderline. Call (561) 200-8592 for a written comparison.
Sometimes. Therma-Tru has discontinued several Canvas, Satin Etch, and Chord patterns since 2018. We maintain cross-reference sheets against our PGT, CGI, and CWS decorative lines, and we can often source a pattern with similar light transmission and privacy factor. When no match exists, we show you samples in your actual opening before you commit. Call (561) 200-8592 to check your pattern status.
Yes, when the scope triggers Boca Raton building code requirements. Impact-rated replacements, changes to egress opening dimensions, and structural modifications require permits; like-for-like IGU swaps in existing non-impact frames typically do not. We identify permit needs in the written scope, pull them as part of the job, and pass inspection before final invoice. The permit cost is listed in your quote, not added later. Call (561) 200-8592 to discuss your specific opening.
Written by Sonia Raman, Owner, Sightline Windows & Doors Boca Raton at Sightline Windows & Doors Boca Raton, serving Boca Raton and nearby areas.










Before
After
Before
After