Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Windows & Doors in Boynton Beach, FL
Window installation in Boynton Beach typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated products starting around $1,100 and custom geometric work reaching $2,800-$5,500 depending on sightline complexity. Most jobs in the 55+ communities along Congress Avenue and Woolbright Road involve removing original single-pane aluminum frames from 1970s-1980s construction and replacing them with Florida Product Approved units that meet Palm Beach County’s Wind-Borne Debris Region requirements. Call (561) 200-8592 to schedule your measured survey; the written quote we leave with you is the same document that governs the installation.
Why Boynton Beach Homes Are Different
Boynton Beach carries one of the densest concentrations of 1970s-1980s planned retirement communities in Palm Beach County. Leisureville and the HOA-governed developments along Congress Avenue and Woolbright Road were built with single-pane aluminum windows and sliding glass doors that now fail simultaneously from age and from noncompliance with current impact standards. HOAs here regularly solicit coordinated bulk replacement bids covering 200-400 units, a procurement dynamic rarely seen at this scale in Delray Beach or Lake Worth Beach.
The housing stock splits into two eras. Older villages near Federal Highway and Military Trail are concrete block stucco construction with jalousie or single-hung single-pane windows and aluminum-frame sliding doors that offer no hurricane protection. Western Boynton Beach, west of Boynton Beach Boulevard, features 1990s-2000s master-planned communities whose builder-grade vinyl windows are now reaching end of life.
Climate conditions here are distinct. Boynton Beach sits within Florida’s Wind-Borne Debris Region but outside Miami-Dade and Broward’s stricter High-Velocity Hurricane Zone, so impact products need standard Florida Building Code Product Approval rather than HVHZ protocols. Contractors who work across county lines frequently trip on this distinction. The Boynton Inlet’s direct Atlantic exposure accelerates salt-air corrosion on aluminum frames in coastal and Intracoastal properties, shortening frame lifespan compared to inland Palm Beach County communities.
HOA architectural review boards in Boynton Beach’s 55+ communities routinely reject window and door orders over wrong frame colors or missing community-standard SDL grids. Pulling and reviewing each HOA’s architectural guidelines before permitting is a non-negotiable local workflow step that out-of-area contractors consistently skip.
Our Main Boynton Beach Services
Most calls we field from Boynton Beach homeowners center on two needs: replacing failing original windows in aging retirement communities, and upgrading to impact-rated products that satisfy both code and HOA requirements. These are the services we route to dedicated Boynton Beach pages.
Window Replacement in Boynton Beach
Window replacement in Boynton Beach means removing original single-pane aluminum or aging builder-grade vinyl units and installing Florida Product Approved replacements that meet Palm Beach County’s Wind-Borne Debris Region requirements. In the 55+ communities along Congress Avenue and Woolbright Road, we regularly coordinate with HOA boards on bulk replacement schedules, pulling architectural guidelines before ordering to avoid review-board rejection over frame color or SDL grid pattern. Window Replacement in Boynton Beach

Impact Windows & Doors in Boynton Beach
Impact windows and doors in Boynton Beach must carry Florida Product Approval under standard FBC protocols, not the stricter HVHZ certification required in Miami-Dade and Broward. We see frequent specification errors from contractors who cross county lines without adjusting for this compliance distinction. Our measured surveys document the exact approval numbers needed for permit submission in Boynton Beach, and the written quote locks in the specified product tier. Impact Windows & Doors in Boynton Beach

Sliding & Patio Doors in Boynton Beach
Sliding and patio door replacement in Boynton Beach addresses the original aluminum-frame units installed in 1970s-1980s retirement communities, which corrode faster here due to salt-air exposure from the Boynton Inlet. Modern replacements from PGT, CGI, or CWS include impact-rated options with thermally broken frames that stop the condensation and air infiltration common in older units. We measure the rough opening, note the sill condition, and specify the exact track system in writing before ordering. Sliding & Patio Doors in Boynton Beach

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Boynton Beach

Window installation in Boynton Beach means working within two distinct housing eras: the 1970s-1980s retirement villages with original single-pane aluminum frames now failing from age and salt corrosion, and the 1990s-2000s western communities where builder-grade vinyl is reaching end of life. In both cases, the replacement must carry Florida Product Approval for Palm Beach County’s Wind-Borne Debris Region, and in HOA-governed communities the architectural review board must sign off on frame color and grid pattern before permit application. Window Installation through Sightline begins with a measured survey the customer keeps, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
The sash won’t stay open, you feel air movement around the frame perimeter, or the single-pane glass sweats condensation on humid Boynton Beach mornings.
What it costs in Boynton Beach
Standard vinyl single or double hung installation in Boynton Beach typically runs $650-$980 per opening; impact-rated units range $1,100-$1,650 depending on size and grid configuration.
How we do it
We remove the existing unit, inspect the sill pan and rough opening for salt corrosion or water intrusion, install the new hung window with backer rod and sealant specified for coastal exposure, then document the sightline measurements and photo record before the customer signs the completion certificate.
Horizontal Roller Windows
Signs you need it
The roller mechanism grinds or sticks, the locking points no longer align, or the single-pane glass transmits enough heat to warm the interior wall surface.
What it costs in Boynton Beach
Horizontal roller replacement in Boynton Beach generally falls between $720-$1,050 for standard vinyl and $1,200-$1,780 for impact-rated products with thermally broken frames.
How we do it
We measure the exact track width and sill slope, specify the roller hardware load rating for the sash weight, install with proper shimming to prevent frame racking, then test operation and lock engagement before photographing the completed assembly.
What Window Installation Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Standard vinyl single/double hung | $650 - $980 |
| Impact-rated single/double hung | $1,100 - $1,650 |
| Horizontal roller (standard vinyl) | $720 - $1,050 |
| Horizontal roller (impact-rated) | $1,200 - $1,780 |
How long does window installation take in Boynton Beach?
Most residential window installations in Boynton Beach complete in one to two days for 8-12 openings, though HOA-coordinated bulk projects in 55+ communities may schedule across multiple weeks to minimize resident disruption. Permits in Palm Beach County typically release in 5-10 business days for standard Product Approval submissions. Call (561) 200-8592 for a written timeline with your estimate.
Do you handle HOA architectural review for Boynton Beach communities?
Yes, we pull and review each HOA’s architectural guidelines before specifying products, and we submit the required documentation to the review board as part of our standard workflow. In Leisureville and similar communities, we’ve learned which frame colors and SDL grid patterns pass review without revision. Call (561) 200-8592 to discuss your community’s specific requirements.
Door Installation in Boynton Beach

Door installation in Boynton Beach addresses two distinct problems: the original aluminum-frame sliding glass doors in 1970s-1980s retirement communities that corrode from salt-air exposure and leak air around weatherstripping, and the entry doors in western subdivisions whose builder-grade fiberglass or steel units have delaminated or warped in the humidity. In both cases, replacement products must meet Florida Product Approval for Palm Beach County’s Wind-Borne Debris Region, and HOA communities require pre-approval of frame finish and hardware style. Door Installation through Sightline includes the measured survey, written scope, and documented photo record as standard.
Entry Doors
Signs you need it
The door sticks in the jamb during humid months, daylight shows around the perimeter when closed, or the threshold has separated from the sill pan.
What it costs in Boynton Beach
Entry door replacement in Boynton Beach typically ranges $1,400-$2,800 for standard fiberglass or steel units, and $2,600-$4,200 for impact-rated products with multi-point locking hardware.
How we do it
We measure the rough opening and note wall thickness for proper jamb depth, specify the sweep and threshold for the finished floor height, install with shims and fasteners rated for the wind-load zone, then test lock engagement and weatherstrip compression before documenting the completed assembly.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current entry door lacks Florida Product Approval labeling, the glass lite is not impact-rated, or your insurance underwriter has flagged noncompliance with Wind-Borne Debris Region requirements.
What it costs in Boynton Beach
Impact-rated entry door systems in Boynton Beach generally run $2,600-$4,200 for the door, frame, and multi-point hardware; decorative glass inserts or sidelite units add $800-$1,600 per lite.
How we do it
We verify the design pressure rating required for the exposure category, specify the door and frame as a tested assembly from Therma-Tru or comparable manufacturer, install with proper anchorage to the concrete block or wood framing, then photograph the Product Approval label and lock hardware for the job record.
What Door Installation Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Standard entry door (fiberglass/steel) | $1,400 - $2,800 |
| Impact-rated entry door system | $2,600 - $4,200 |
| Decorative glass insert or sidelite | $800 - $1,600 |
Do impact doors need different frames than standard doors in Boynton Beach?
Yes, impact-rated doors must be installed as a tested assembly with the specific frame, hinges, and multi-point lock hardware listed in the Florida Product Approval documentation; mixing components voids the rating and fails inspection. We specify the complete assembly in writing before ordering. Call (561) 200-8592 for a written specification.
Can you match my HOA’s required door style in Boynton Beach?
Yes, we pull the architectural guidelines before specifying any entry door and verify that the proposed panel profile, glass pattern, and hardware finish appear in the approved materials list. In Boynton Beach’s 55+ communities, we maintain records of which configurations have passed review previously. Call (561) 200-8592 to confirm your community’s requirements.
Energy-Efficient Windows in Boynton Beach

Energy-efficient windows in Boynton Beach solve a problem specific to the local housing stock: original single-pane aluminum windows in 1970s-1980s communities conduct heat directly into conditioned space, and even 1990s-2000s builder-grade vinyl units often carry U-factors above 0.35 and SHGC ratings that do not account for south and west exposure. The result is cooling loads that strain aging HVAC systems in concrete block stucco construction with minimal wall insulation. Energy-Efficient Windows from Sightline are specified by performance tier, with U-factor, SHGC, and air infiltration rates documented in the written quote.
Low-E & Argon Gas Glass
Signs you need it
Your current windows have clear double-pane glass without Low-E coating, or the argon gas has escaped and the center-of-glass U-factor has degraded to match plain air-filled units.
What it costs in Boynton Beach
Low-E with argon gas fill typically adds $80-$140 per opening to standard vinyl replacement pricing in Boynton Beach, or comes standard in mid-tier energy-efficient packages starting around $780-$1,120 per window.
How we do it
We specify the Low-E coating type by climate zone, verify argon fill retention through manufacturer certification, and document the rated U-factor and SHGC on the written quote for comparison against your current utility bills.
ENERGY STAR Replacement Windows
Signs you need it
Your utility bills spike during July and August, the south- and west-facing rooms stay uncomfortably warm, or you’re replacing HVAC equipment and want to reduce the load calculation.
What it costs in Boynton Beach
ENERGY STAR certified replacement windows in Boynton Beach typically range $850-$1,350 per opening for vinyl frames, and $1,450-$2,200 for impact-rated products that also carry the certification.
How we do it
We orient each opening and specify the appropriate SHGC for exposure, verify the NFRC label ratings against the quote, and install with proper air sealing to achieve the tested air infiltration rate rather than leaving performance on the table.
What Energy-Efficient Windows Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $140 |
| ENERGY STAR vinyl replacement window | $850 - $1,350 |
| ENERGY STAR impact-rated window | $1,450 - $2,200 |
Will energy-efficient windows lower my cooling bills in Boynton Beach?
Yes, reducing solar heat gain through south- and west-facing windows directly decreases cooling load; in concrete block stucco homes with minimal wall insulation, window performance is often the most cost-effective improvement. We document the projected U-factor and SHGC improvement on the written quote. Call (561) 200-8592 for a performance comparison against your current windows.
Do energy-efficient windows still need to be impact-rated in Boynton Beach?
They do if the opening is within Palm Beach County’s Wind-Borne Debris Region, which covers most of Boynton Beach; ENERGY STAR and impact ratings are separate certifications and both must be verified. We specify products that carry both labels when required, and document the certification numbers on the quote. Call (561) 200-8592 to verify your property’s wind-borne debris zone.
Impact Garage Doors in Boynton Beach

Impact garage doors in Boynton Beach address a vulnerability common in 1970s-1980s retirement communities: original garage doors with no wind-load rating that fail under pressure differential during tropical storms, allowing structural damage to the roof system through the garage opening. Western Boynton Beach subdivisions from the 1990s-2000s often carry builder-grade steel doors rated for only 20-25 psf, below current Wind-Borne Debris Region requirements for larger openings. Impact Garage Doors from Sightline are specified by design pressure rating and installed with the track and hardware tested as a complete assembly.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door lacks a wind-load sticker, the panels bow inward during thunderstorms, or your insurance inspection flagged the opening as unprotected.
What it costs in Boynton Beach
Hurricane-rated garage door replacement in Boynton Beach typically runs $1,800-$3,200 for a standard two-car opening, with wind-load ratings from 20 psf to 50 psf depending on exposure and opening size.
How we do it
We calculate the required design pressure from the opening size, exposure category, and mean roof height, specify the door and track as a tested assembly with the rating label visible, install with proper jamb and header anchorage to the concrete block, then test operation and document the rating label for the photo record.
Wind-Load Code Compliance
Signs you need it
You’re selling the property and the buyer’s inspection noted noncompliance, or you’re replacing the garage door after a storm and want to meet current code rather than grandfathered standards.
What it costs in Boynton Beach
Wind-load code compliance upgrades in Boynton Beach range $1,800-$3,200 for the door and track assembly, with additional structural reinforcement of the jambs or header occasionally needed at $400-$900.
How we do it
We verify the applicable code cycle for the permit, specify the door assembly to the required design pressure, pull permits through Palm Beach County, coordinate inspection, and leave the approved inspection card and photo record with the customer.
What Impact Garage Doors Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Hurricane-rated garage door (standard 2-car) | $1,800 - $3,200 |
| High wind-load upgrade (50 psf) | $2,400 - $3,800 |
| Jamb/header structural reinforcement | $400 - $900 |
Does my garage door need impact rating or just wind-load rating in Boynton Beach?
Most Boynton Beach properties require wind-load rating for garage doors; true impact rating with missile-level protection is typically reserved for doors with glazing or for specific high-exposure zones. We verify the exact requirement from your property’s wind-borne debris zone classification before specifying. Call (561) 200-8592 for a written specification.
Can you install a hurricane-rated garage door without replacing the opener?
Sometimes, if the existing opener’s horsepower and rail system are compatible with the heavier wind-load door and the safety reverse system meets current standards; we test and document compatibility during the measured survey. If replacement is needed, we specify it in writing. Call (561) 200-8592 to schedule the survey.
Custom & Geometric Windows in Boynton Beach

Custom and geometric windows in Boynton Beach serve two distinct needs: the arched and shaped openings in Mediterranean-influenced architecture common in Intracoastal and estate properties, and the oversized window walls in newer western subdivisions where builder-grade units failed prematurely and the opening size exceeds standard catalog dimensions. In both cases, the sightline geometry must be measured precisely and the structural support verified before fabrication, as custom units cannot be field-modified without voiding warranties and Florida Product Approval. Custom & Geometric Windows through Sightline include full-scale measured drawings in the quote document.
Geometric & Shaped Windows
Signs you need it
You have trapezoid, octagon, or circular windows that are leaking, the original single-pane shaped units have no impact rating, or you’re renovating and want to preserve the architectural character with modern performance.
What it costs in Boynton Beach
Geometric and shaped window replacement in Boynton Beach typically ranges $1,800-$3,500 per opening for standard custom vinyl, and $2,800-$5,500 for impact-rated products with insulated laminated glass.
How we do it
We measure every angle and radius with digital templates, produce full-scale shop drawings for customer approval, fabricate from ECO Window Systems or comparable custom line, and install with custom flashing kits fabricated to the exact profile.
Oversized Openings
Signs you need it
Your window wall spans more than 8 feet without a mullion, the original unit is sagging at the center, or you’re combining multiple openings into one and need engineered support.
What it costs in Boynton Beach
Oversized custom window installations in Boynton Beach generally run $3,200-$6,500 per opening depending on span, structural reinforcement needs, and whether impact rating is required; steel-reinforced frames or laminated glass add 25-40%.
How we do it
We consult a structural engineer when the header span exceeds standard tables, specify the frame reinforcement and glass thickness for the design pressure, coordinate crane or specialized lifting equipment for units over 150 pounds, and document the installation with load-bearing connection photos.
What Custom & Geometric Windows Costs in Boynton Beach
| Item | Typical range in Boynton Beach |
|---|---|
| Geometric/shaped window (standard custom) | $1,800 - $3,500 |
| Geometric/shaped window (impact-rated) | $2,800 - $5,500 |
| Oversized opening with structural reinforcement | $3,200 - $6,500 |
How long does custom window fabrication take in Boynton Beach?
Custom geometric and oversized windows typically require 6-10 weeks from measured survey to delivery, with impact-rated units sometimes extending to 12 weeks depending on glass lamination scheduling. We build this timeline into the written quote and coordinate permit submission to align with delivery. Call (561) 200-8592 for current lead times.
Do custom windows still need HOA approval in Boynton Beach?
Yes, and because custom units are fabricated to order, HOA rejection after production is costly; we submit shop drawings and finish samples to the architectural review board before releasing the fabrication order. In Boynton Beach’s 55+ communities, we maintain records of which custom profiles and grid patterns have passed review. Call (561) 200-8592 to verify your community’s process.
Brands We Service in Boynton Beach

We install and service eight manufacturer lines in Boynton Beach: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for ES Windows, ECO Window Systems, and Therma-Tru are stocked at our Miami office for next-day availability on most service calls. See our brands for performance tier and specification details.
Pricing for Windows & Doors in Boynton Beach, FL
| Service | Typical range in Boynton Beach |
|---|---|
| Standard vinyl single/double hung window | $650 - $980 |
| Impact-rated single/double hung window | $1,100 - $1,650 |
| Horizontal roller window (standard vinyl) | $720 - $1,050 |
| Horizontal roller window (impact-rated) | $1,200 - $1,780 |
| Standard entry door (fiberglass/steel) | $1,400 - $2,800 |
| Impact-rated entry door system | $2,600 - $4,200 |
| ENERGY STAR vinyl replacement window | $850 - $1,350 |
| ENERGY STAR impact-rated window | $1,450 - $2,200 |
| Hurricane-rated garage door (2-car) | $1,800 - $3,200 |
| Geometric/shaped window (impact-rated) | $2,800 - $5,500 |
| Oversized custom window with reinforcement | $3,200 - $6,500 |
Prices in Boynton Beach push toward the higher end when HOA architectural review requires specific finishes or SDL grids not in standard inventory, or when salt corrosion in coastal properties demands additional frame preparation. The written quote you receive before any work starts is the final invoice; Haven Clause 1 means no change orders, no surprises.
Neighborhoods We Serve in Boynton Beach

We work across Boynton Beach from the Intracoastal estates to the western master-planned communities, with crews dispatched from our Miami office and scheduled to minimize travel time across the service area. Most appointments are available within three to five business days of the initial call.
- Leisureville
- Aberdeen
- Canyon Isles
- Quantum Park
- Hypoluxo Island
Service Area - Cities Near Boynton Beach
Sightline serves Boynton Beach and the surrounding Palm Beach and northern Broward communities. We regularly coordinate projects in Delray Beach, FL, Boca Raton, FL, Deerfield Beach, FL, and Coconut Creek, FL, handling the compliance distinctions between Palm Beach County’s Wind-Borne Debris Region and Broward’s stricter HVHZ requirements where properties sit near the county line.
Serving Boynton Beach, FL - Our Local Coverage Area

We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Boynton Beach
We typically schedule measured surveys within three to five business days, with emergency board-up available for compromised openings. Calls are answered live 24/7, and dispatch is coordinated from our Miami office for South Florida coverage.
Yes, we pull all required permits through Palm Beach County and schedule inspections; the permit number and inspection schedule are included in the written scope. For HOA communities, we also manage architectural review submission before permit application.
Boynton Beach’s dense concentration of 1970s-1980s 55+ communities creates unique bulk-replacement procurement and strict HOA review processes, while its position outside HVHZ but inside the Wind-Borne Debris Region requires specific Florida Product Approval protocols that differ from Boca Raton’s mix of HVHZ and standard zones.
Call (561) 200-8592 to schedule your free estimate. Every engagement begins with a measured survey you keep, and the written quote governs the final invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boynton Beach Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.










Before
After
Before
After