Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coconut Creek, FL
Window installation in Coconut Creek runs $380-$920 per opening for standard vinyl or aluminum replacement, with impact-rated products starting around $620 due to the city’s High-Velocity Hurricane Zone requirements. Most homes here carry original 1970s-1980s aluminum frames that corrode in the humidity and fail current HVHZ code the moment any permitted work touches the opening. We measure every window to the sixteenth, write the price on the survey you keep, and install to the Haven Standard we’ve followed since 2012. Call (561) 200-8592 to schedule your free measured survey.
Why Coconut Creek Homes Are Different
Coconut Creek sits entirely within Broward County’s High-Velocity Hurricane Zone, alongside Miami-Dade, with design pressures rated for 170+ mph winds. That means every window and door product must carry a valid Florida Product Approval with a Notice of Acceptance for large-missile impact. The housing stock is dominated by mid-rise and garden-style condos built between roughly 1972 and 1988, concentrated in age-restricted communities like Wynmoor Village, where lightweight aluminum frames and jalousie or single-pane sliding glass remain common.
The near-constant humidity accelerates aluminum oxidation, causes vinyl glazing seals to delaminate, and warps wood door jambs within a few seasons. In Wynmoor Village and comparable Coconut Creek condo associations, the HOA board must approve any window or door change in writing before the city permit is pulled. That dual-approval bottleneck routinely adds 4-8 weeks and catches out-of-area contractors who skip the step, leading to stop-work orders and fines. We coordinate both approvals as standard practice.
Our Main Coconut Creek Services
Most calls from Coconut Creek homeowners center on two needs: replacing failed original windows in aging condo stock, and upgrading to HVHZ-compliant impact products. We also handle the three specialized services below.
Window Replacement in Coconut Creek
We replace original aluminum single-pane and jalousie windows in Wynmoor Village and 1980s subdivisions with HVHZ-compliant vinyl or aluminum impact frames. Every replacement begins with a measured survey that becomes your written quote, and we pull permits only after HOA approval is documented. Window Replacement in Coconut Creek
Impact Windows & Doors in Coconut Creek
Impact-rated installation for Coconut Creek’s HVHZ code requires Florida Product Approval with NOA documentation for every unit. We specify PGT, CGI, or ES Windows by performance tier and price range, not by margin, and we handle the permit package including HOA sign-off. Impact Windows & Doors in Coconut Creek
Sliding & Patio Doors in Coconut Creek
Original sliding glass doors in Coconut Creek’s 1970s-1980s stock use thin aluminum frames with failed rollers and no impact rating. We measure the rough opening, specify a replacement with HVHZ-compliant hardware, and document the photo record at completion. Sliding & Patio Doors in Coconut Creek
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Coconut Creek
Most Coconut Creek window installation involves replacing original 1970s-1980s aluminum frames in condo and garden-home units that have corroded in the humidity and carry zero impact resistance. The city’s position in the HVHZ means any new window must meet Florida Product Approval standards for large-missile impact, which narrows the product field to verified manufacturer lines and eliminates off-brand options that some contractors stock. Window Installation through Sightline means the measured survey and the written price are the same document, with no change orders after signing.
Single & Double Hung Windows
Signs you need it
Your sashes stick or drop, the aluminum frame shows white oxidation at the sill, or you feel air movement around the closed sash in a Wynmoor Village unit.
What it costs in Coconut Creek
Standard vinyl single or double hung installation runs $420-$780 per opening; impact-rated aluminum frames with HVHZ NOA documentation run $680-$1,140.
How we do it
We record frame width, height, and squareness to the sixteenth, verify HOA approval is on file, remove the old unit without damaging the stucco surround, install the new hung window with proper shimming and fastening pattern per the NOA, then seal with backer rod and approved sealant before photographing the completed opening.
Horizontal Roller Windows
Signs you need it
The roller carriage grinds, the sash jumps the track, or the locking points no longer align on your original 1980s slider.
What it costs in Coconut Creek
Standard horizontal roller replacement costs $480-$840 per opening; impact-rated units with laminated glass and reinforced frames run $720-$1,200.
How we do it
We measure the daylight opening and the existing frame depth, specify a roller unit from CWS or ECO Window Systems rated for the opening’s design pressure, install with corrosion-resistant fasteners at 8-inch centers, and test operation before the photo record.
What Window Installation Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Standard vinyl single/double hung | $420-$780 |
| Impact-rated single/double hung | $680-$1,140 |
| Standard horizontal roller | $480-$840 |
| Impact-rated horizontal roller | $720-$1,200 |
Do you pull permits for window installation in Coconut Creek?
Yes. We pull the city permit after HOA written approval is documented, and we schedule the required inspection. Call (561) 200-8592 to start the measured survey - estimates are free.
Will the price change once work starts?
No. Haven Clause 1 means the written price from your measured survey is the final price; we do not issue change orders for conditions we should have seen during survey. Call (561) 200-8592 for your free estimate.
Door Installation in Coconut Creek
Door installation in Coconut Creek must navigate the same HVHZ product-approval requirements as windows, with the added complexity of entry-door hardware and wind-load testing for operable panels. Original wood jambs in 1980s single-family homes on the eastern grid have often warped from humidity, and condo entry doors in Wynmoor Village frequently lack proper fire-rating or impact labels required for replacement. Door Installation at Sightline includes a written scope with hardware schedule and the photo record at completion.
Entry Doors
Signs you need it
Your door sticks seasonally, daylight shows around the weatherstrip, or the jamb has softened from humidity intrusion.
What it costs in Coconut Creek
Standard fiberglass or steel entry door installation runs $1,200-$2,400; impact-rated entry systems with HVHZ NOA and multi-point hardware run $2,800-$4,600.
How we do it
We measure the rough opening and note hinge location and swing, specify a Therma-Tru or comparable unit with documented HVHZ approval, install with composite jamb material to resist humidity warping, and adjust multi-point hardware for proper compression.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current front door has no impact label, your insurance requires HVHZ compliance, or you’re replacing a failed original in a permitted renovation.
What it costs in Coconut Creek
Hurricane-rated front entry systems with laminated glass inserts and reinforced frames run $3,200-$5,400 installed, depending on size and hardware selection.
How we do it
We verify the design pressure rating for your specific Coconut Creek address, select a door and frame assembly with matching NOA from CGI or ES Windows, install with proper anchorage to the structural frame, and document the impact label in the photo record.
What Door Installation Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Standard fiberglass/steel entry door | $1,200-$2,400 |
| Impact-rated entry system | $2,800-$4,600 |
| Hurricane-rated front entry with glass | $3,200-$5,400 |
Do entry doors in Coconut Creek need HOA approval?
In Wynmoor Village and most Coconut Creek condo associations, yes - written HOA approval is required before permit application, and we handle both steps. Call (561) 200-8592 to schedule your measured survey.
How long does door installation take?
Most single entry door replacements complete in one day; full impact-rated systems with sidelights may require two days for proper sealing and hardware adjustment. Call (561) 200-8592 for a timeline with your estimate.
Energy-Efficient Windows in Coconut Creek
Energy-efficient windows in Coconut Creek address a specific local problem: original 1970s-1980s single-pane aluminum units conduct heat aggressively and carry no low-emissivity coating, driving cooling loads higher than necessary in a climate where air conditioning runs ten months a year. The humidity also degrades glazing seals over time, fogging the airspace in any existing insulated units. Energy-Efficient Windows from Sightline are specified by U-factor and SHGC performance, not by stock availability, with the written price fixed before work begins.
Low-E & Argon Gas Glass
Signs you need it
Your floors and furnishings fade near windows, or your cooling bill runs high despite a recent HVAC service in your Coconut Creek home.
What it costs in Coconut Creek
Low-E coating with argon gas fill in a standard vinyl frame runs $520-$880 per opening; impact-rated low-E units with laminated outer lite run $780-$1,260.
How we do it
We measure each opening and calculate the solar heat gain coefficient appropriate for your exposure, specify a coated glass package from ECO Window Systems or Mr-Glass with documented performance values, and verify the argon fill with a non-destructive meter before installation.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows as part of a permitted renovation and want documented efficiency performance for rebate or resale purposes.
What it costs in Coconut Creek
ENERGY STAR certified vinyl replacement windows run $580-$960 per opening; impact-rated ENERGY STAR units with HVHZ approval run $840-$1,380.
How we do it
We verify the ENERGY STAR climate zone rating for South Florida, select a qualifying product from our verified lines with the NFRC label intact, install with proper air-sealing detail at the perimeter, and include the performance documentation in your job file.
What Energy-Efficient Windows Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Low-E/argon vinyl window | $520-$880 |
| Impact-rated low-E unit | $780-$1,260 |
| ENERGY STAR certified replacement | $580-$960 |
| Impact-rated ENERGY STAR unit | $840-$1,380 |
Do energy-efficient windows qualify for rebates in Coconut Creek?
Some utility rebate programs require ENERGY STAR certification and professional installation documentation; we provide the NFRC labels and our photo record for your application. Call (561) 200-8592 to confirm current programs.
Will low-E coating block too much light?
Modern low-E coatings are spectrally selective, blocking infrared heat while maintaining high visible light transmission; we specify the right coating for your orientation. Call (561) 200-8592 to review options during your survey.
Impact Garage Doors in Coconut Creek
Impact garage doors in Coconut Creek are required by HVHZ code for any new installation or replacement, yet many 1980s-1990s single-family homes still carry non-rated steel or wood-panel doors that fail wind-load requirements. The large surface area of a garage door creates significant wind pressure, and a failed door can pressurize the structure during a storm event. Impact Garage Doors from Sightline include wind-load engineering documentation and the photo record of installed hardware.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door has no wind-load sticker, the panels rattle in moderate wind, or you’re replacing a failed door as part of an insurance claim.
What it costs in Coconut Creek
Hurricane-rated steel garage doors with reinforced tracks and hardware run $1,800-$3,400 for a standard two-car opening; impact-rated with glazing sections run $2,600-$4,800.
How we do it
We measure the opening and calculate the design pressure for your Coconut Creek wind zone, specify a door and track system with matching Florida Product Approval, install with proper spring balance and reinforcement struts, and test the auto-reverse safety function before documenting the installation.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient wind-load documentation, or an inspector flagged your existing door during a sale inspection.
What it costs in Coconut Creek
Wind-load compliance verification and hardware upgrade for an existing door runs $680-$1,400; full replacement with compliant system runs $1,800-$3,400.
How we do it
We review the existing door and frame for structural adequacy, calculate the required design pressure per ASCE 7 for your specific address, install the specified reinforcement or replacement system, and provide the NOA documentation for permit closure.
What Impact Garage Doors Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Hurricane-rated steel garage door | $1,800-$3,400 |
| Impact-rated with glazing sections | $2,600-$4,800 |
| Wind-load compliance upgrade | $680-$1,400 |
Do garage doors need HOA approval in Coconut Creek?
Many Coconut Creek HOAs, including Wynmoor Village, require written approval for garage door style and color changes; we include HOA documentation in our permit package. Call (561) 200-8592 to start the process.
Can you add impact rating to my existing garage door?
Some existing doors can be upgraded with reinforcement struts, upgraded track, and hardware to meet wind-load requirements; others require full replacement - we assess during the measured survey. Call (561) 200-8592 for your free evaluation.
Custom & Geometric Windows in Coconut Creek
Custom and geometric windows in Coconut Creek serve two distinct needs: replacing original shaped units in 1980s architecture with HVHZ-compliant versions, and creating new openings with performance-rated custom shapes that standard catalogs don’t stock. The city’s condo stock includes radius-topped windows and octagonal feature units that require field measurement and shop fabrication to the sixteenth. Custom & Geometric Windows from Sightline include the full-size template approval before fabrication begins.
Geometric & Shaped Windows
Signs you need it
Your triangular, trapezoid, or octagonal window has failed seals or corroded frames, and standard replacement units don’t match the opening shape.
What it costs in Coconut Creek
Geometric vinyl or aluminum windows with custom fabrication run $680-$1,400 per opening; impact-rated geometric units with HVHZ NOA run $1,200-$2,400.
How we do it
We create a full-size template of your existing opening or new rough opening, submit it for shop drawing approval, fabricate in aluminum or vinyl with the specified glazing package, and install with custom flashings fabricated to match the wall plane.
Arched & Curved Windows
Signs you need it
Your radius-topped window shows condensation between lites, or the curved frame has separated at the springline from humidity cycling.
What it costs in Coconut Creek
Arched top windows with custom radius fabrication run $840-$1,680; impact-rated arched units with laminated curved glass run $1,400-$2,800.
How we do it
We measure the chord and rise of the arch to the sixteenth, verify the structural support at the springline, specify a unit from ViewLux or comparable with documented curved-glass performance, and install with reinforced support at the head before sealing and photographing.
What Custom & Geometric Windows Costs in Coconut Creek
| Item | Typical range in Coconut Creek |
|---|---|
| Geometric shaped window | $680-$1,400 |
| Impact-rated geometric unit | $1,200-$2,400 |
| Arched top window | $840-$1,680 |
| Impact-rated arched unit | $1,400-$2,800 |
How long does custom window fabrication take?
Custom geometric windows typically require 6-10 weeks for shop drawing approval and fabrication; we begin HOA and permit processes in parallel to avoid delay. Call (561) 200-8592 to schedule template measurement.
Can you match my existing window shape exactly?
We template the existing opening or create from architectural drawings, and you approve the shop drawing before fabrication begins - Haven Clause 1 applies to custom work too. Call (561) 200-8592 to review your specific shape.
Brands We Service in Coconut Creek
We install and service eight verified manufacturer lines in Coconut Creek: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for ES Windows, ECO Window Systems, and Mr-Glass are stocked locally through our Miami office, with most hardware and seal kits available within 48 hours. our brands
Pricing for Windows & Doors in Coconut Creek, FL
| Service | Typical range in Coconut Creek |
|---|---|
| Standard vinyl single/double hung window | $420-$780 |
| Impact-rated single/double hung window | $680-$1,140 |
| Standard horizontal roller window | $480-$840 |
| Impact-rated horizontal roller window | $720-$1,200 |
| Standard fiberglass/steel entry door | $1,200-$2,400 |
| Impact-rated entry system | $2,800-$4,600 |
| Hurricane-rated front entry with glass | $3,200-$5,400 |
| Low-E/argon vinyl window | $520-$880 |
| Impact-rated low-E unit | $780-$1,260 |
| Hurricane-rated steel garage door | $1,800-$3,400 |
| Geometric shaped window | $680-$1,400 |
| Arched top window | $840-$1,680 |
Prices in Coconut Creek increase when HOA approval requires multiple submission rounds, when stucco repair exceeds standard trim coverage, or when original openings are out-of-square beyond normal shimming range. The price we write on your measured survey is the price on the final invoice - Haven Clause 1, no exceptions.
Neighborhoods We Serve in Coconut Creek
We measure, install, and document windows and doors across Coconut Creek’s full grid, from the condo communities of Wynmoor Village to the single-family subdivisions on the eastern edge. Crews are dispatched from our Miami office and typically schedule Coconut Creek surveys within three business days of call.
- Wynmoor Village
- Coco Lakes
- Winston Park
- Sandalfoot Cove
- Turtle Run
Service Area - Cities Near Coconut Creek
Our crews serve the full Broward County HVHZ corridor from our Miami office, with regular work in Margate, FL to the north, Pompano Beach, FL to the east, Coral Springs, FL to the northwest, and Deerfield Beach, FL to the southeast. Each city carries the same HVHZ requirements but different HOA and permit timelines, which we coordinate as part of standard scheduling.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coconut Creek
In Wynmoor Village and most Coconut Creek condo associations, written HOA approval takes 2-4 weeks, and the city permit requires that documentation before filing. We submit the full product package, including Florida Product Approval and color samples, with your measured survey to avoid back-and-forth delay.
Yes. We pull all required city permits after HOA written approval is documented, schedule inspections, and provide the passed inspection documentation for your records - standard on every job, not an add-on.
Yes. Bring us any written estimate from another Coconut Creek contractor and we will review the product specifications, permit handling, and scope against what we find during our measured survey - at no charge, with no obligation to hire.
Call (561) 200-8592 to schedule your free measured survey. We’ll bring the written price before any work starts, and we leave a documented photo record when the job is done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coconut Creek Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.