Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Impact Garage Doors: The Boca Raton Owner’s Guide
We stock and install Mr-Glass-compatible impact garage doors in Boca Raton, with typical installed prices running $2,800-$5,400 depending on opening size, wind-load rating, and whether the track hardware needs replacement. Most Mr-Glass impact garage doors we service are same-day measurable, and we carry common torsion springs, rollers, and impact-rated panels for the 3200 and 3400 series on our trucks. Most Boca Raton owners discover a problem when the door hangs crooked in the frame, groans through its travel, or fails to seal after a storm - the symptom that brings the call is rarely the only thing worn out.
Which Mr-Glass Models This Applies To
Mr-Glass builds impact-rated garage doors under the 3200, 3400, and 3600 series designations. The 3200 is the single-layer aluminum impact door with a 2-inch rail and stile profile; the 3400 adds a thermal break and a heavier 3-inch frame. The 3600 is the insulated, wind-rated line rated to Miami-Dade HVHZ standards, and it is the one we see most often in Boca Raton’s newer construction east of Federal Highway. The model sticker is usually on the interior face of the bottom section, behind the rubber weatherseal, and it lists the design pressure rating - DP-50 or DP-60 - which tells us whether the door was built for the 170-mph or 200-mph zone.
We are an independent service provider; we are not affiliated with Mr-Glass. For parts, we source OEM when the series is still in production and use verified aftermarket equivalents when it is not. The 3200 series was discontinued in 2019, so those doors almost always run aftermarket track hardware and compatible springs. The 3400 and 3600 still carry OEM panels and hardware, though lead times from the factory run 3-4 weeks. We stock torsion springs sized for the 3200 and 3400 on our trucks, along with 2-inch and 3-inch roller sets, because those are what fail first in Boca Raton’s salt air.
Signs Your Mr-Glass Impact Garage Door Is Failing

- The door hangs crooked in the opening. This usually means a failed torsion spring or a seized roller on one side. On Mr-Glass doors, the 3200 series uses a lighter-gauge track that can twist if the spring goes unbalanced, so the crook is both symptom and cause of further damage.
- Grinding or groaning through the travel. The nylon rollers on early 3400 units degrade in UV faster than the steel bearings; once the nylon cracks, the steel rides directly on the aluminum track. We hear it before we see it, and by then the track is often scored.
- Visible daylight around the perimeter after the door closes. Impact-rated doors depend on perimeter seal compression to maintain their wind-load certification. A worn bottom rubber or sagging panel edge breaks that seal, and the door is no longer doing the job it was installed for.
- The opener strains or reverses mid-travel. Mr-Glass doors are heavier than standard residential doors - the 3600 series runs 180-220 pounds on a 16-foot opening - and a failing spring puts that load entirely on the opener. The motor overheats, the logic board faults, and now you have two problems.
- Panel dents or glazing cracks after a named storm. The impact-rated glass in a Mr-Glass door is laminated, so it may spider without falling out. But the dented aluminum stile behind it has lost structural integrity, and the next storm will find that weakness. We document this with photos, because insurance adjusters in Boca Raton have seen it before.
Before
AfterReplacement Cost & What’s Included
| Component | Price Range (Installed) | Notes |
|---|---|---|
| Torsion spring replacement (single) | $280-$420 | Includes spring set, winding cones, safety cables; priced per spring |
| Full roller set (10-12 rollers) | $340-$480 | Nylon or steel, sized to 2″ or 3″ track |
| Bottom section replacement (impact-rated, 9’×7′) | $1,200-$1,800 | OEM if available; aftermarket equivalent with same DP rating |
| Full door replacement, 3200/3400 series | $2,800-$4,200 | Includes track, hardware, haul-away; wind-load permit pulled |
| Full door replacement, 3600 series | $4,000-$5,400 | HVHZ-rated, insulated; permit and inspection included |
The range depends on three things: whether we can reuse the existing track, whether the opener needs recalibration for the new door weight, and whether Boca Raton’s building department requires a permit for the work. We pull permits when they are required, pass inspection, and include that in the written scope. Every job carries our 365-Day Done Right Promise under the Haven Standard. The price we write is the price on the invoice - no change orders, no discoveries.
DIY or Call Us?

There is one thing a homeowner can safely check: whether the door is plugged in and whether the opener’s manual release is engaged. Everything else on a Mr-Glass impact garage door carries real hazard. Torsion springs are wound to 100+ foot-pounds of torque; a slip during adjustment or removal can break a hand or put a winding bar through a wall. The impact-rated panels are heavier than they look, and a 16-foot section of 3600-series door will bend its own frame if lifted unevenly. We have been called to jobs in Boca Raton where a well-intentioned owner made a $200 spring problem into a $1,800 door replacement.
We carry the right spring charts for Mr-Glass doors, the right winding bars, and the liability coverage. Measure it twice, write it down, then we can talk price. If you are unsure what series you have, text us a photo of the sticker and we will tell you before we drive out. Call (561) 200-8592 to schedule your free estimate.
FAQs
In Boca Raton’s salt-air climate, the torsion springs on a Mr-Glass door typically last 8-12 years, the nylon rollers 6-10 years, and the impact-rated panels 20-30 years if they do not take a direct hit. The 3200 series, with its lighter track, often shows frame fatigue around year 15. We log every unit we install by brand, glass package, U-factor, and date, so when you call us five years out, we have the paperwork. Call (561) 200-8592 for an exact quote - estimates are free.
A single cracked roller or frayed cable can be replaced in isolation, but a failed torsion spring always gets a matched pair, because the unworn spring has already cycled past its mate’s failure point. Impact-rated panels with structural dents or cracked glazing cannot be repaired to code; they must be replaced to maintain the door’s wind-load certification. We will tell you which category you are in when we measure. Call (561) 200-8592 for an exact quote - estimates are free.
A spring or roller swap takes 2-3 hours. A full door replacement on an existing opening takes one day, plus a second day if Boca Raton building inspection is required, which it is for any HVHZ-rated install. We schedule the inspection, meet the inspector, and pass it before we invoice. Call (561) 200-8592 for an exact quote - estimates are free.
We stock torsion springs, rollers, cables, and weatherseal for the 3200 and 3400 series, and we carry compatible track hardware for the 3600. Full 3600-series impact panels are factory-order with a 3-4 week lead time, but we can secure and brace the opening if the door is compromised. We also stock parts for PGT, CGI, and CWS garage doors on the same trucks. Call (561) 200-8592 for an exact quote - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Boca Raton at Sightline Windows & Doors Boca Raton, serving Boca Raton and nearby areas.










Before
After
Before
After