Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Coconut Creek
Impact windows and doors in Coconut Creek must carry a Miami-Dade NOA or Florida Product Approval with a large-missile impact rating and documented design pressure - no exceptions, because the entire city sits inside Broward County’s High-Velocity Hurricane Zone. We’re Sightline Windows & Doors, and our Impact Windows & Doors in Coconut Creek team coordinates dispatch from our South Florida office to serve homeowners here directly. Call (561) 200-8592 to schedule your measured survey; the written quote you receive is the same document that governs the install.
Why Sightline Windows & Doors Boca Raton Is Coconut Creek’s Preferred Impact Windows & Doors Company
We’ve installed impact-rated openings across Coconut Creek since 2012, from the garden-home clusters of Wynmoor Village to the single-family streets near Lyons Road and Sample Road, specializing in Window Replacement - Coconut Creek. Our crews know the difference between a standard Florida Product Approval and the Miami-Dade NOA that Broward’s HVHZ inspectors actually accept on the job site.
Coconut Creek customers leave reviews citing the photo record we deliver and the written scope they keep. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. If the sash doesn’t seat, the frame doesn’t read square, or the glazing bead shows a gap, we return and correct it under Haven Clause 5.
Our response time to Coconut Creek runs same-day or next-day for measured surveys, with installs scheduled once the HOA approval and city permit are both in hand. We don’t start work on a Coconut Creek condo opening until we’ve seen the association’s written sign-off - because we’ve watched out-of-area crews get stop-work orders after skipping that step.
Every technician who arrives at your Coconut Creek property is background-checked, uniformed, and identified by license number before crossing the threshold. Haven Clause 3: Verified Crews. The person at your door matches the person on record.
Our Impact Windows & Doors Services in Coconut Creek

Impact-Resistant Windows
Impact-resistant windows in Coconut Creek aren’t a product category - they’re a code mandate. Every unit must survive the large-missile test (a 9-pound 2×4 fired at 50 feet per second) and maintain structural integrity at design pressures exceeding 170 mph equivalent wind speed. We specify PGT, CGI, and ES Windows lines by actual performance tier, not by what sits in a warehouse. For a typical Coconut Creek opening, expect $680-$1,400 per window installed, with the NOA documentation included in your packet.

Hurricane Impact Windows
Hurricane impact windows for Coconut Creek’s HVHZ zone require more than laminated glass. The frame anchorage, the sill pan flashing, and the fastener schedule all appear on the approved drawing set that the city inspector compares against your installation in real time. We pull the permit, we meet the inspector, and we leave you the signed inspection card plus the wind-mitigation paperwork your insurer needs. In Coconut Creek, that documentation is worth the premium reduction.

Single Hung Impact Windows
Single hung impact windows remain the workhorse for Coconut Creek’s vertical condo stacks and narrow garden-home bedrooms. The fixed upper sash and operable lower sash simplify the impact-rated design, but the balance shoe and jamb liner still need exact sightline measurement - which is why our measured survey document is the same paper you sign for the quote. A single hung in a standard 36-by-72 Coconut Creek opening runs $720-$1,250 installed.

Double Hung Impact Windows
Double hung impact windows suit Coconut Creek’s larger master bedrooms and end-unit exposures where both sashes need to tilt in for cleaning. The dual-operable design adds complexity to the impact rating - more moving parts, more gasket interfaces, more places for a cheap unit to fail inspection. We specify ECO Window Systems and Mr-Glass lines where the tilt hardware is tested as part of the assembly, not bolted on after certification.

Wind Mitigation & HVHZ Code Compliance
This is where Coconut Creek work separates from standard Florida installs. Wind mitigation documentation under Florida Statute 627.0629 requires proof that your installed product matches the NOA on file with the state. Our Impact Windows & Doors team includes that documentation as standard evidence on every job - Haven Clause 4. The cheap quote leaves it out, and six months later the homeowner discovers the insurance credit was denied for lack of paperwork.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Coconut Creek
We work with eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - and we specify by what your Coconut Creek opening requires, not by what we need to move. For the humidity-beaten wood door jambs common in eastern Coconut Creek’s 1990s subdivisions, we typically recommend Therma-Tru impact-rated fiberglass entry systems that won’t warp in three seasons. For the corroded aluminum frames in Wynmoor Village’s 1970s stock, we lean toward vinyl or thermally broken aluminum from ES Windows or ECO Window Systems, with the NOA packet pre-verified before we quote. Parts and warranty support are handled through our South Florida supply chain, so a failed balance shoe or cracked glazing bead doesn’t sit on order for weeks.
Common Impact Windows & Doors Problems We See in Coconut Creek Homes

- Corroded aluminum frames in Wynmoor Village and comparable 1970s-80s condos. The original single-pane jalousie and sliding units weren’t built for four decades of salt-laden humidity. The frame walls thin out, the weep holes clog, and the glazing beads no longer seat. A replacement unit that reuses the old opening without checking substrate integrity often fails the HVHZ inspection for anchorage.
- HOA approval gaps that trigger stop-work orders. In Coconut Creek’s large condo associations, particularly around Wynmoor Village, the board must approve window changes in writing before the city permit is pulled. Contractors who skip this step - or who don’t know it exists - cost homeowners fines and weeks of delay.
- Non-impact “bargain” doors that void insurance credits. A Coconut Creek homeowner removes old impact windows during a renovation, installs a non-rated product, and later discovers the labeled NOA coverage is gone. The carrier won’t honor the wind-mitigation credit because the approved product is no longer in the opening.
- Humidity-warped wood jambs in eastern Coconut Creek single-family homes. The near-constant moisture pushes wood door frames out of square in as little as two to three years, breaking the weatherstrip seal and allowing wind-driven rain past the threshold. An impact-rated door in a twisted jamb still leaks; we measure the frame opening, not just the door slab.
Pricing for Impact Windows & Doors in Coconut Creek, FL
| Service | Typical Range in Coconut Creek |
|---|---|
| Single hung impact window (standard opening) | $720 - $1,250 |
| Double hung impact window (standard opening) | $850 - $1,550 |
| Horizontal roller / sliding impact window | $920 - $1,680 |
| Vinyl impact window (full-frame replacement) | $680 - $1,400 |
| Impact-rated entry door with frame | $2,400 - $4,800 |
| Impact sliding glass door (standard 6-foot) | $3,200 - $5,600 |
| Wind mitigation documentation package | Included - no separate charge |
What moves a Coconut Creek job toward the higher end: HVHZ-compliant framing replacement (not just insert), stucco or drywall repair around the opening, permit and HOA coordination, and product upgrades to higher design-pressure ratings. What we never add: a separate “documentation fee” for the wind-mitigation paperwork. That’s Haven Clause 1 and Haven Clause 4 - the price is written, and the evidence is included.
Call (561) 200-8592 for your free measured survey. Bring a competitor’s written estimate and we’ll review it at no charge - our Free Second Opinion on Any Written Estimate.
We Also Serve Cities Near Coconut Creek

Our crews work throughout Broward and northern Miami-Dade, including Coconut Creek neighbors in Margate, Pompano Beach, Coral Springs, and Deerfield Beach. Each city carries its own permit office, its own inspector preferences, and its own HOA landscape - we coordinate accordingly.
Serving Coconut Creek, FL - Our Local Coverage Area
We’re based in the Coconut Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Coconut Creek

Yes - because Coconut Creek sits entirely within Broward County’s HVHZ, every replacement window or door must carry a valid Florida Product Approval with a Notice of Acceptance (NOA) rated for large-missile impact and the specific design pressure your opening faces. A standard Florida Product Approval alone is not sufficient; the Miami-Dade NOA is the document Broward inspectors reference on-site. Call (561) 200-8592 and we’ll verify the NOA on any product you’re considering before you buy.
A compliant quote includes the permit pull, the HVHZ inspection scheduling, the NOA packet matching your exact product and opening size, and the wind-mitigation affidavit your insurer requires under Florida Statute 627.0629. The cheap quote often lists “impact windows” with no named manufacturer, no NOA reference, and no permit line item - leaving you to discover the gap at inspection, or worse, when your insurance renewal arrives. Our written scope shows every line; the measurement and the quote are the same document.
Wynmoor Village’s board must approve any window or door modification in writing before the city of Coconut Creek will accept your permit application. The process typically adds 4-8 weeks and requires submission of the proposed product’s NOA, color samples, and installation method statement. We handle this submission as part of our standard coordination; crews who don’t know this requirement start work without it and face stop-work orders. Call (561) 200-8592 and we’ll walk through the Wynmoor packet with you.
Yes, if the installation is documented correctly. Florida Statute 627.0629 mandates premium discounts for wind-mitigation features, but the insurer requires proof: the NOA for the installed product, the passed inspection, and a signed wind-mitigation affidavit. We deliver all three as standard evidence on every job. The discount varies by carrier and policy, but the documentation we provide is what makes the credit possible. Without it, you paid for impact windows and got no premium relief.
The original aluminum single-pane and jalousie units in Coconut Creek’s 1970s-80s housing stock typically show functional failure in 25-35 years, but visible corrosion appears sooner - often within 15-20 years in this humidity. The frame walls pit, the thermal breaks degrade, and the glazing seals lose adhesion. We regularly measure openings in Wynmoor Village where the frame metal is too thin to support a new anchor pattern; the entire subframe needs replacement, not just the sash. Call (561) 200-8592 for a free assessment of your opening condition.
Ready to see what a documented, written-price impact window or door installation looks like in Coconut Creek? Call (561) 200-8592 to schedule your free measured survey. You’ll keep the measurement document, you’ll sign the same paper as your quote, and you’ll receive the photo record and wind-mitigation paperwork when the job is done - every time, under the Haven Standard.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Coconut Creek since 2012.










Before
After
Before
After