Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Tamarac, FL
Window and door installation in Tamarac typically runs $650-$2,800 per opening depending on product tier and masonry scope, with most CBS ranch homes requiring custom-sized impact units to replace original 1960s-70s aluminum frames. We measure every rough opening, record the sightline and frame condition, and hand you the written price before any work begins - Haven Clause 1. Call (561) 200-8592 to schedule your free measured survey.
Most Tamarac homes were built as part of Broward County’s first master-planned retirement communities, leaving an unusually dense concentration of jalousie and single-pane aluminum windows that are both hurricane non-compliant and ineligible for wind-mitigation insurance credits. Our crews serve Tamarac from the brand’s Miami office, carrying the eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what your opening requires, not by what is in stock.
Why Tamarac Homes Are Different
Tamarac was purpose-built in the 1960s and 1970s as one of Broward County’s first master-planned retirement communities. That planning decision left behind an unusually uniform housing stock: single-story CBS ranch homes and low-rise condominiums built under near-identical plans, most with original jalousie windows in bedrooms, bathrooms, and Florida rooms. These louvered glass units carry zero wind-mitigation credit and are flagged by insurers during policy renewals.
The window and door rough openings in these structures are non-standard by current sizing conventions. We regularly measure openings that require custom or modified impact units plus careful masonry work through the concrete block surrounds. Although Tamarac sits about 12 miles inland, Broward County falls within Florida’s wind-borne debris region, so all replacements must carry Florida Product Approval or Miami-Dade NOA. The sustained combination of intense UV, high ambient humidity, and salt-laden air accelerates seal failure and frame corrosion in the aging aluminum frames that remain widespread throughout the city’s tracts.
For the large fixed-income, older homeowner demographic that dominates Tamarac, the primary driver is measurable: certified impact-rated window-and-door packages directly reduce Citizens Insurance or private homeowner premiums.
Our Main Tamarac Services
The two services Tamarac homeowners call about most are window replacement and impact protection, with sliding and patio doors rounding out the majority of inquiries.
Window Replacement in Tamarac
We replace original jalousie and single-pane aluminum windows in CBS ranch homes and low-rise condos throughout Tamarac’s retirement tracts, often performing concrete-block infill to close oversized jalousie openings down to standard rough openings before setting impact single-hung units. Every replacement begins with a measured survey you keep, and the written quote cannot differ from that document. Window Replacement in Tamarac
Impact Windows & Doors in Tamarac
Impact-rated packages for Tamarac must carry Florida Product Approval or Miami-Dade NOA to satisfy Broward County’s wind-borne debris requirements and unlock wind-mitigation insurance credits. We specify PGT, CGI, CWS, ES Windows, ECO Window Systems, and Mr-Glass units by performance tier and price range, not by margin. Impact Windows & Doors in Tamarac
Sliding & Patio Doors in Tamarac
Original sliding glass doors in Tamarac’s 1960s-70s CBS homes typically exceed current energy code by a wide margin and lack impact rating; we replace them with thermally-broken, impact-rated multi-slide or standard lift-and-slide units from PGT, CGI, and ViewLux, often resizing the rough opening to accommodate modern door heights. Sliding & Patio Doors in Tamarac
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Tamarac
Window installation in Tamarac means working with concrete block stucco construction, non-standard rough openings, and the legacy of jalousie and single-pane aluminum frames that dominate the city’s 1960s-70s retirement tracts. The combination of intense UV, salt-laden air, and high humidity accelerates seal failure and frame corrosion, making replacement a structural and insurance necessity rather than a cosmetic upgrade. We perform Window Installation under the Haven Standard: measured survey, written price, verified crew, documented photo record.
Single & Double Hung Windows
Signs you need it
Your single-pane aluminum frames show corrosion at the weep holes, the sashes no longer stay open without a prop, or your insurer has flagged jalousie units for non-compliance.
What it costs in Tamarac
Single and double hung window installation in Tamarac typically ranges from $650 to $1,400 per opening for standard vinyl or aluminum impact units, with custom sizes or concrete-block infill for jalousie conversions adding $200-$400 per opening.
How we do it
We measure the rough opening and sightline, document frame condition with photos you receive, remove the existing unit, perform masonry infill if converting from jalousie, set the new impact-rated hung window with proper shimming and fastening into the CBS surround, seal with approved membrane and backer rod, and finish with stucco match and paint.
Horizontal Roller Windows
Signs you need it
Your existing rollers grind or stick, the track is corroded from humidity exposure, or you need operable ventilation in a room where a hung window would obstruct the sightline.
What it costs in Tamarac
Horizontal roller window installation in Tamarac typically ranges from $750 to $1,550 per opening for impact-rated units, with wider two-lite configurations or coastal-grade hardware at the upper end.
How we do it
We verify the track width and structural support in the CBS header, remove the old roller and track assembly, set the new impact-rated horizontal roller with level sill and plumb jambs, test operation across the full travel, and document the installation with the photo record included on every job.
What Window Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Single/Double Hung - standard impact vinyl/aluminum | $650 - $1,400 |
| Horizontal Roller - standard impact | $750 - $1,550 |
| Concrete-block infill for jalousie conversion | $200 - $400 per opening |
How long does window installation take in Tamarac?
Most single-opening replacements in Tamarac’s CBS ranch homes finish in one day; full-home jobs with jalousie conversions and masonry infill typically span two to three days. Call (561) 200-8592 for a written timeline with your estimate.
Will new windows lower my insurance in Tamarac?
Certified impact-rated windows with Florida Product Approval or Miami-Dade NOA qualify for wind-mitigation credits that reduce Citizens Insurance and private homeowner premiums; jalousie and single-pane aluminum units carry zero credit. We document the rating labels for your insurer as part of the photo record.
Door Installation in Tamarac
Door installation in Tamarac requires navigating non-standard rough openings in 1960s-70s CBS construction and replacing original entry doors that lack impact rating and proper weathersealing. The salt-laden air and high humidity accelerate corrosion in original hardware and threshold assemblies, while insurers increasingly require impact-rated entry protection for policy renewal. We perform Door Installation with the same measured survey and written-price protocol applied to every opening.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door lacks a Miami-Dade NOA or Florida Product Approval sticker, the jamb shows rot or termite damage at the threshold, or your insurer has required impact-rated entry protection for renewal.
What it costs in Tamarac
Hurricane-proof front and entry door installation in Tamarac typically ranges from $1,800 to $3,500 including frame, impact-rated slab or glass insert, hardware, and installation into CBS construction.
How we do it
We measure the rough opening and assess the CBS surround for structural integrity, remove the old door and frame, install a pressure-rated frame with proper fastening into block, hang the impact-rated door with adjustable hinges, install multi-point lock hardware, and verify seal compression with a documented smoke test.
French & Double Doors
Signs you need it
Your existing French doors leak during driving rain, the astragal is warped from humidity cycling, or you need to replace a non-rated patio door pair with an impact-compliant unit for code and insurance compliance.
What it costs in Tamarac
French and double door installation in Tamarac typically ranges from $2,200 to $4,500 for impact-rated units, with wider configurations or integrated transoms at the upper end.
How we do it
We verify header load capacity for the wider opening in CBS construction, remove the old door pair and track if present, install the new impact-rated French door unit with proper shimming and structural fastening, adjust the active and inactive leaf for even reveal, and document operation and seal with photos.
What Door Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Hurricane-Proof Front & Entry Door | $1,800 - $3,500 |
| French & Double Doors | $2,200 - $4,500 |
| Threshold replacement / rot repair in CBS jamb | $350 - $650 |
Do I need a permit to replace my front door in Tamarac?
Yes - Broward County requires a building permit for entry door replacement when the unit is impact-rated or when the rough opening is modified; we pull the permit and schedule inspection as part of our scope. Call (561) 200-8592 and we will confirm permit requirements for your specific job.
Can you match my stucco after door installation?
We finish with stucco patch and color-matched elastomeric paint on every CBS door installation; the texture match is included, though exact color match depends on your existing paint age and sun exposure. We document the finish condition before and after in your photo record.
Energy-Efficient Windows in Tamarac
Energy-efficient window installation in Tamarac addresses the specific penalty of single-pane aluminum and jalousie windows in 1960s-70s CBS homes, where uncontrolled solar heat gain and air infiltration drive cooling costs upward year-round. The intense UV and high ambient humidity compound the problem by accelerating seal degradation in aging units. We specify Energy-Efficient Windows from ECO Window Systems and ES Windows with performance data, not generic efficiency claims.
Low-E & Argon Gas Glass
Signs you need it
Your west- and south-facing rooms overheat by mid-afternoon, your utility bills spike in summer months, or you can feel radiant heat through the glass of your existing single-pane units.
What it costs in Tamarac
Low-E and argon gas glass packages in Tamarac typically add $80-$150 per opening to the base window cost, with soft-coat Low-E and dual-pane argon fill at the upper end of that range.
How we do it
We specify the appropriate Low-E coating by orientation and SHGC requirement, order the insulated glass unit with argon fill and warm-edge spacer, install it in the impact-rated frame with proper glazing tape and cap beads, and document the U-factor and SHGC ratings on your written scope.
ENERGY STAR Replacement Windows
Signs you need it
You want verified performance data rather than marketing claims, you may qualify for utility rebate programs, or you are replacing windows as part of a broader efficiency upgrade to your Tamarac home.
What it costs in Tamarac
ENERGY STAR replacement windows in Tamarac typically range from $850 to $1,800 per opening for impact-rated vinyl or aluminum units with certified U-factor and SHGC performance.
How we do it
We verify the ENERGY STAR climate zone certification for South Florida, specify the window from our ECO Window Systems or ES Windows lines with the appropriate NFRC label, install with proper air sealing at the frame-to-block interface, and include the certification documentation in your photo record.
What Energy-Efficient Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Low-E & Argon upgrade per opening | $80 - $150 add-on |
| ENERGY STAR impact replacement window | $850 - $1,800 |
| Full-home Low-E package (10-15 openings) | $8,500 - $22,000 |
Will energy-efficient windows really lower my electric bill in Tamarac?
Yes - replacing single-pane aluminum with Low-E, argon-filled impact units typically reduces cooling load by 15-25% in Tamarac’s CBS ranch homes, with the greatest improvement on west and south exposures. Call (561) 200-8592 for a written estimate with projected performance data.
What’s the difference between Low-E and tinted glass?
Low-E coatings reflect infrared heat while transmitting visible light; tinted glass absorbs solar energy and can darken the interior. We specify Low-E for most Tamarac applications because it reduces heat gain without the light loss that makes interiors feel closed in.
Impact Garage Doors in Tamarac
Impact garage door installation in Tamarac protects one of the largest openings in your home, a critical vulnerability in Broward County’s wind-borne debris region where garage door failure can lead to catastrophic pressure buildup in the structure. Most Tamarac garage doors are original to the 1960s-70s construction, uninsulated, and carry no wind-load rating. We install Impact Garage Doors with Miami-Dade NOA or Florida Product Approval, measured and specified for your specific header and track configuration.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a visible wind-load rating sticker, the panels rattle in moderate winds, or your insurer has required impact-rated garage door protection for policy renewal or wind-mitigation credit.
What it costs in Tamarac
Hurricane-rated garage door installation in Tamarac typically ranges from $1,600 to $3,200 for a standard two-car opening, with insulated impact panels or custom wood-grain finishes at the upper end.
How we do it
We measure the opening width, headroom, and sideroom, assess the torsion spring and track system for wind-load capacity, remove the old door and hardware, install the new impact-rated sectional door with reinforced struts and heavy-duty track, balance and test the spring tension, and document the NOA label and installation with photos.
Wind-Load Code Compliance
Signs you need it
You are selling your Tamarac home and the buyer’s inspection flagged the garage door as non-compliant, or you are upgrading your wind-mitigation inspection to maximize insurance premium reductions.
What it costs in Tamarac
Wind-load code compliance upgrades in Tamarac typically range from $800 to $1,800 when the existing door can be reinforced with approved hardware, or $1,600 to $3,200 for full replacement with a rated unit.
How we do it
We review your current door for retrofit potential against the Florida Building Code wind-load map for Tamarac’s zone, specify either reinforcement kit or full replacement with Miami-Dade NOA documentation, perform the installation or upgrade, and provide the certification paperwork for your wind-mitigation inspector.
What Impact Garage Doors Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Hurricane-Rated Garage Door - standard two-car | $1,600 - $3,200 |
| Wind-Load Reinforcement Kit (existing door) | $800 - $1,800 |
| Impact-rated opener upgrade | $450 - $850 |
Do I need a permit for garage door replacement in Tamarac?
Yes - Broward County requires a building permit for garage door replacement when installing an impact-rated or wind-load-compliant unit; we pull the permit, provide the product approval documentation, and schedule inspection. Call (561) 200-8592 to confirm permit scope for your specific opening.
Can I keep my existing garage door opener with a new impact door?
Sometimes - we evaluate the opener’s horsepower, rail capacity, and safety reverse function against the new door’s weight and wind-load reinforcement; if the opener is marginal, we recommend upgrade to avoid strain and premature failure. We document the compatibility assessment in your written scope.
Custom & Geometric Windows in Tamarac
Custom and geometric window installation in Tamarac solves the non-standard rough openings that are routine in 1960s-70s CBS ranch homes, where builders used varied window shapes for architectural interest in otherwise uniform retirement tracts. Jalousie conversions, Florida room upgrades, and decorative gable windows all require units sized to existing masonry rather than stock dimensions. We fabricate Custom & Geometric Windows from PGT, CGI, and ViewLux lines with measured survey verification before production.
Geometric & Shaped Windows
Signs you need it
You have a trapezoid, triangle, or octagon window that is leaking or fogged, you are converting a jalousie opening to a fixed architectural shape, or your HOA requires maintenance of original geometric elements.
What it costs in Tamarac
Geometric and shaped window installation in Tamarac typically ranges from $1,200 to $2,800 per opening, with complex polygons or integrated impact rating at the upper end.
How we do it
We take a full field measurement of the irregular opening including all angles and sightline clearances, draft the shop drawing for your approval, fabricate the custom geometric unit with impact-rated glazing where required, install with custom flashings to match the CBS and stucco geometry, and document the fit with before-and-after photos.
Arched & Curved Windows
Signs you need it
Your arched window has developed seal failure visible as condensation between panes, the curved frame has separated at the radius joint from humidity cycling, or you are replacing a non-impact arched unit with a rated equivalent for code compliance.
What it costs in Tamarac
Arched and curved window installation in Tamarac typically ranges from $1,800 to $3,500 per opening, with true radius construction and impact-rated laminated glass at the upper end.
How we do it
We measure the springline, rise, and radius of the existing arch, verify structural support in the CBS header for the curved load path, fabricate the custom arched frame with matched sightlines to adjacent units, install with flexible membrane flashing at the curved head, and document the radius match and seal integrity.
What Custom & Geometric Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Geometric & Shaped Windows | $1,200 - $2,800 |
| Arched & Curved Windows | $1,800 - $3,500 |
| Custom sizing surcharge (non-standard rough opening) | $150 - $350 per opening |
How long does custom window fabrication take?
Custom geometric and arched units from PGT, CGI, and ViewLux typically require 4-6 weeks from approved shop drawing to delivery in Tamarac; we coordinate measurement, approval, and production scheduling so your opening is not left open longer than necessary. Call (561) 200-8592 to schedule measurement and review the timeline.
Can you match the sightline of my existing windows with a custom shape?
Yes - we record the frame depth, sash width, and muntin pattern of your adjacent units during the measured survey and specify the custom window with matched sightlines so the new unit reads as part of the original composition, not an afterthought. The match specification is written into your scope before fabrication begins.
Brands We Service in Tamarac
We stock parts and specify units from eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Tamarac’s climate and code environment, we most often draw from ES Windows and ECO Window Systems for energy-efficient impact units, Therma-Tru for entry door slabs and frames, and Mr-Glass for specialized laminated applications. Most standard hardware and weathersealing components are carried on our Tamarac service vehicles; custom glass or frame orders typically arrive within 5-10 business days. our brands
Pricing for Windows & Doors in Tamarac, FL
| Service | Typical range in Tamarac |
|---|---|
| Single/Double Hung Window - impact-rated | $650 - $1,400 |
| Horizontal Roller Window - impact-rated | $750 - $1,550 |
| Concrete-block infill for jalousie conversion | $200 - $400 per opening |
| Hurricane-Proof Front & Entry Door | $1,800 - $3,500 |
| French & Double Doors | $2,200 - $4,500 |
| Low-E & Argon upgrade per opening | $80 - $150 add-on |
| ENERGY STAR impact replacement window | $850 - $1,800 |
| Hurricane-Rated Garage Door - two-car | $1,600 - $3,200 |
| Wind-Load Reinforcement Kit | $800 - $1,800 |
| Geometric & Shaped Window | $1,200 - $2,800 |
| Arched & Curved Window | $1,800 - $3,500 |
| Custom sizing surcharge | $150 - $350 per opening |
Prices in Tamarac push toward the upper end when concrete-block infill is required for jalousie conversion, when openings exceed standard rough dimensions by more than two inches, or when stucco texture and color matching involves extensive scaffolding. The price we write is the price you pay - Haven Clause 1 means the measured survey and the final invoice are the same document.
Neighborhoods We Serve in Tamarac
We serve the full Tamarac city limits, from the original 1960s retirement tracts near Commercial Boulevard to the condominium communities along University Drive and the single-family areas south of McNab Road. Dispatch and scheduling are coordinated from our Miami office; crews typically arrive within scheduled windows across the Tamarac service area.
- Mainlands of Tamarac
- Woodlands Country Club
- Tamarac Lakes
- Westwood Community
- Concord Village
Service Area - Cities Near Tamarac
Sightline serves Tamarac and surrounding Broward and Palm Beach County communities. Homeowners in Boca Raton, FL, Deerfield Beach, FL, Delray Beach, FL, and Lighthouse Point, FL receive the same measured survey, written price, and documented photo record under the Haven Standard.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tamarac
We answer calls live 24/7 and typically schedule measured surveys within 2-4 business days for standard window and door inquiries in Tamarac; production and installation timelines depend on product selection and permit status, which we specify in writing.
Many Tamarac communities, particularly the original retirement tracts and country club developments, maintain architectural review committees that require pre-approval of window style, color, and grid pattern; we provide the product data sheets and installation drawings needed for your HOA submission.
Broward County requires a building permit for all impact-rated window and door replacements and for any modification to rough openings; we pull the permit, provide Florida Product Approval or Miami-Dade NOA documentation, and schedule required inspections as standard scope on every job.
Call (561) 200-8592 to schedule your free measured survey and written estimate. Every job carries the 365-Day Done Right Promise, and you’ll receive a documented photo record when the work is complete.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tamarac Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.